s| Manual Pages for FreeBSD

Manual pages for FreeBSD (s):

• s2p(1)
  psed - a stream editor
• sa(4)
  sa - SCSI Sequential Access device driver
• sa(8)
  sa - print system accounting statistics
• sa-awl(1)
  sa - awl - examine and manipulate SpamAssassin"s auto-whitelist db
• sa-compile(1)
  sa - compile - compile SpamAssassin ruleset into native code
• sa-learn(1)
  sa - learn - train SpamAssassin"s Bayesian classifier
• sa-update(1)
  sa - update - automate SpamAssassin rule updates
• sade(8)
  sade - sysadmins disk editor
• safe(4)
  safe - SafeNet crypto accelerator
• savecore(8)
  savecore - save a core dump of the operating system
• savetty(3)
  def_prog_mode, def_shell_mode, reset_prog_mode, reset_shell_mode, resetty, savetty, getsyx, setsyx, ripoffline, curs_set, napms - low-level curses routines
• sbp(4)
  sbp - Serial Bus Protocol 2 (SBP-2) Mass Storage Devices driver
• sbp_targ(4)
  sbp_targ - Serial Bus Protocol 2 (SBP-2) Target Mode devices driver
• sbread(3)
  sbread - read and write superblocks of a UFS file system
• sbrk(2)
  brk - change data segment size
• sbuf(9)
  sbuf - safe string composition
• sbuf_bcat(9)
  sbuf - safe string composition
• sbuf_bcopyin(9)
  sbuf - safe string composition
• sbuf_bcpy(9)
  sbuf - safe string composition
• sbuf_cat(9)
  sbuf - safe string composition
• sbuf_clear(9)
  sbuf - safe string composition
• sbuf_copyin(9)
  sbuf - safe string composition
• sbuf_cpy(9)
  sbuf - safe string composition
• sbuf_data(9)
  sbuf - safe string composition
• sbuf_delete(9)
  sbuf - safe string composition
• sbuf_done(9)
  sbuf - safe string composition
• sbuf_error(9)
  sbuf - safe string composition
• sbuf_finish(9)
  sbuf - safe string composition
• sbuf_len(9)
  sbuf - safe string composition
• sbuf_new(9)
  sbuf - safe string composition
• sbuf_new_for_sysctl(9)
  sbuf - safe string composition
• sbuf_printf(9)
  sbuf - safe string composition
• sbuf_putc(9)
  sbuf - safe string composition
• sbuf_setpos(9)
  sbuf - safe string composition
• sbuf_set_drain(9)
  sbuf - safe string composition
• sbuf_trim(9)
  sbuf - safe string composition
• sbuf_vprintf(9)
  sbuf - safe string composition
• sbwrite(3)
  sbread - read and write superblocks of a UFS file system
• sc(4)
  syscons - the console driver
• scalb(3)
  scalb - IEEE test functions
• scalbf(3)
  scalb - IEEE test functions
• scalbln(3)
  scalbln - adjust exponent
• scalblnf(3)
  scalbln - adjust exponent
• scalblnl(3)
  scalbln - adjust exponent
• scalbn(3)
  scalbln - adjust exponent
• scalbnf(3)
  scalbln - adjust exponent
• scalbnl(3)
  scalbln - adjust exponent
• scale_form(3)
  form_win - make and break form window and subwindow associations
• scale_menu(3)
  menu_win - make and break menu window and subwindow associations
• scandir(3)
  scandir - scan a directory
• scanf(3)
  scanf - input format conversion
• scanw(3)
  scanw, wscanw, mvscanw, mvwscanw, vwscanw, vw_scanw - convert formatted input from a curses window
• scbus(4)
  CAM - Common Access Method SCSI/ATA subsystem
• scc(4)
  scc - driver for Serial Communications Controllers (SCC) devices
• scd(4)
  scd - Sony CDU31/33 CD-ROM driver
• scdaemon(1)
  scdaemon - Smartcard daemon for the GnuPG system
• sched(1)
  builtin - shell built-in commands
• sched_getparam(2)
  sched_setparam - set/get scheduling parameters
• sched_getscheduler(2)
  sched_setscheduler - set/get scheduling policy and scheduler parameters
• sched_get_priority_max(2)
  sched_get_priority_max - get scheduling parameter limits
• sched_get_priority_min(2)
  sched_get_priority_max - get scheduling parameter limits
• sched_rr_get_interval(2)
  sched_get_priority_max - get scheduling parameter limits
• sched_setparam(2)
  sched_setparam - set/get scheduling parameters
• sched_setscheduler(2)
  sched_setscheduler - set/get scheduling policy and scheduler parameters
• sched_yield(2)
  sched_yield - yield processor
• sched_4bsd(4)
  sched_4bsd - 4.4BSD scheduler
• sched_ule(4)
  sched_ule - ULE scheduler
• schedclock(9)
  curpriority_cmp - perform round-robin scheduling of runnable processes
• schedcpu(9)
  curpriority_cmp - perform round-robin scheduling of runnable processes
• scheduler(9)
  curpriority_cmp - perform round-robin scheduling of runnable processes
• sched_setup(9)
  curpriority_cmp - perform round-robin scheduling of runnable processes
• scp(1)
  scp - secure copy (remote file copy program)
• screen(1)
  screen - screen manager with VT100/ANSI terminal emulation
• screen(4)
  screen - pc display interface
• screensaver(4)
  splash - splash screen / screen saver interface
• script(1)
  script - make typescript of terminal session
• scrl(3)
  scroll, scrl, wscrl - scroll a curses window
• scroll(3)
  scroll, scrl, wscrl - scroll a curses window
• scrollok(3)
  clearok, idlok, idcok, immedok, leaveok, setscrreg, wsetscrreg, scrollok, nl, nonl - curses output options
• scr_dump(3)
  scr_dump, scr_restore, scr_init, scr_set - read (write) a curses screen from (to) a file
• scr_init(3)
  scr_dump, scr_restore, scr_init, scr_set - read (write) a curses screen from (to) a file
• scr_restore(3)
  scr_dump, scr_restore, scr_init, scr_set - read (write) a curses screen from (to) a file
• scr_set(3)
  scr_dump, scr_restore, scr_init, scr_set - read (write) a curses screen from (to) a file
• SCSI(4)
  CAM - Common Access Method SCSI/ATA subsystem
• sctp(4)
  sctp - Internet Stream Control Transmission Protocol
• sctp_generic_recvmsg(2)
  sctp_generic_recvmsg - receive data from a peer
• sctp_generic_sendmsg(2)
  sctp_generic_sendmsg - send data to a peer
• sctp_peeloff(2)
  sctp_peeloff - detach an association from a one-to-many socket to its own fd
• sctp_bindx(3)
  sctp_bindx - bind or unbind an SCTP socket to a list of addresses.
• sctp_connectx(3)
  sctp_connectx - connect an SCTP socket with multiple destination addresses.
• sctp_freeladdrs(3)
  sctp_freepaddrs - release the memory returned from a previous call
• sctp_freepaddrs(3)
  sctp_freepaddrs - release the memory returned from a previous call
• sctp_getaddrlen(3)
  sctp_getaddrlen - return the address length of an address family
• sctp_getassocid(3)
  sctp_getassocid - return an association id for a specified socket address.
• sctp_getladdrs(3)
  sctp_getpaddrs - return a list of addresses to the caller
• sctp_getpaddrs(3)
  sctp_getpaddrs - return a list of addresses to the caller
• sctp_opt_info(3)
  sctp_opt_info - get SCTP socket information
• sctp_recvmsg(3)
  sctp_recvmsg - receive a message from an SCTP socket
• sctp_send(3)
  sctp_send - send a message from an SCTP socket
• sctp_sendmsg(3)
  sctp_sendmsg - send a message from an SCTP socket
• sctp_sendmsgx(3)
  sctp_sendmsg - send a message from an SCTP socket
• sctp_sendx(3)
  sctp_send - send a message from an SCTP socket
• sdhci(4)
  sdhci - PCI SD Host Controller bridge driver
• sdiff(1)
  sdiff - side-by-side merge of file differences
• sdoc(7)
  sdoc - guide to adding security considerations sections to manual pages
• sdp(3)
  SDP_GET8 - Bluetooth SDP routines
• sdpcontrol(8)
  sdpcontrol - SDP query utility
• sdpd(8)
  sdpd - Bluetooth Service Discovery Protocol daemon
• sdp_attr2desc(3)
  SDP_GET8 - Bluetooth SDP routines
• sdp_change_service(3)
  SDP_GET8 - Bluetooth SDP routines
• sdp_close(3)
  SDP_GET8 - Bluetooth SDP routines
• sdp_error(3)
  SDP_GET8 - Bluetooth SDP routines
• SDP_GET128(3)
  SDP_GET8 - Bluetooth SDP routines
• SDP_GET16(3)
  SDP_GET8 - Bluetooth SDP routines
• SDP_GET32(3)
  SDP_GET8 - Bluetooth SDP routines
• SDP_GET64(3)
  SDP_GET8 - Bluetooth SDP routines
• SDP_GET8(3)
  SDP_GET8 - Bluetooth SDP routines
• sdp_open(3)
  SDP_GET8 - Bluetooth SDP routines
• sdp_open_local(3)
  SDP_GET8 - Bluetooth SDP routines
• SDP_PUT128(3)
  SDP_GET8 - Bluetooth SDP routines
• SDP_PUT16(3)
  SDP_GET8 - Bluetooth SDP routines
• SDP_PUT32(3)
  SDP_GET8 - Bluetooth SDP routines
• SDP_PUT64(3)
  SDP_GET8 - Bluetooth SDP routines
• SDP_PUT8(3)
  SDP_GET8 - Bluetooth SDP routines
• sdp_register_service(3)
  SDP_GET8 - Bluetooth SDP routines
• sdp_search(3)
  SDP_GET8 - Bluetooth SDP routines
• sdp_unregister_service(3)
  SDP_GET8 - Bluetooth SDP routines
• sdp_uuid2desc(3)
  SDP_GET8 - Bluetooth SDP routines
• securelevel(7)
  security - introduction to security under FreeBSD
• security(7)
  security - introduction to security under FreeBSD
• securelevel_ge(9)
  securelevel_gt - test active securelevel
• securelevel_gt(9)
  securelevel_gt - test active securelevel
• sed(1)
  sed - stream editor
• seed48(3)
  drand48 - pseudo random number generators and initialization routines
• seekdir(3)
  opendir - directory operations
• seldrain(9)
  seldrain - record and wakeup select requests
• select(2)
  select - synchronous I/O multiplexing
• selectdevs(3)
  devstat - device statistics utility library
• selrecord(9)
  seldrain - record and wakeup select requests
• selwakeup(9)
  seldrain - record and wakeup select requests
• sem(4)
  sem - POSIX semaphores
• sema(9)
  sema - kernel counting semaphore
• sema_destroy(9)
  sema - kernel counting semaphore
• sema_init(9)
  sema - kernel counting semaphore
• sema_post(9)
  sema - kernel counting semaphore
• sema_timedwait(9)
  sema - kernel counting semaphore
• sema_trywait(9)
  sema - kernel counting semaphore
• sema_value(9)
  sema - kernel counting semaphore
• sema_wait(9)
  sema - kernel counting semaphore
• semctl(2)
  semctl - control operations on a semaphore set
• semget(2)
  semget - obtain a semaphore id
• semop(2)
  semop - atomic array of operations on a semaphore set
• sem_close(3)
  sem_open - named semaphore operations
• sem_destroy(3)
  sem_destroy - destroy an unnamed semaphore
• sem_getvalue(3)
  sem_getvalue - get the value of a semaphore
• sem_init(3)
  sem_init - initialize an unnamed semaphore
• sem_open(3)
  sem_open - named semaphore operations
• sem_post(3)
  sem_post - increment (unlock) a semaphore
• sem_timedwait(3)
  sem_timedwait - lock a semaphore
• sem_trywait(3)
  sem_wait - decrement (lock) a semaphore
• sem_unlink(3)
  sem_open - named semaphore operations
• sem_wait(3)
  sem_wait - decrement (lock) a semaphore
• send(2)
  send - send a message from a socket
• send(4)
  send - Kernel side support for Secure Neighbor Discovery (SeND)
• send-pr(1)
  send - pr - send problem report (PR) to a central support site
• sendbug(1)
  send - pr - send problem report (PR) to a central support site
• sendfile(2)
  sendfile - send a file to a socket
• sendmsg(2)
  send - send a message from a socket
• sendmail(8)
  sendmail - an electronic mail transport agent
• sendto(2)
  send - send a message from a socket
• seq(1)
  seq - print sequences of numbers
• services(5)
  services - service name data base
• service(8)
  service - control (start/stop/etc.) or list system services
• services_mkdb(8)
  services_mkdb - generate the services database
• ses(4)
  ses - SCSI Environmental Services driver
• set(1)
  builtin - shell built-in commands
• setac(3)
  setac - look up information from the audit_control database
• setaudit(2)
  setaudit - set audit session state
• setaudit_addr(2)
  setaudit - set audit session state
• setauid(2)
  setauid - set audit session ID
• setauclass(3)
  getauclassent - look up information from the audit_class database
• setauevent(3)
  free_au_event_ent - look up information from the audit_event database
• setauuser(3)
  setauuser - look up information from the audit_user database
• setbuf(3)
  setbuf - stream buffering operations
• setbuffer(3)
  setbuf - stream buffering operations
• setcchar(3)
  getcchar, setcchar - Get a wide character string and rendition from a cchar_t or set a cchar_t from a wide-character string
• setclasscontext(3)
  setclasscontext - functions for using the login class capabilities database
• setclassenvironment(3)
  setclasscontext - functions for using the login class capabilities database
• setclassresources(3)
  setclasscontext - functions for using the login class capabilities database
• setcontext(3)
  getcontext - get and set user thread context
• setdomainname(3)
  getdomainname - get/set the NIS domain name of current host
• setegid(2)
  setuid - set user and group ID
• setenv(1)
  builtin - shell built-in commands
• setenv(3)
  getenv - environment variable functions
• seteuid(2)
  setuid - set user and group ID
• setextattr(8)
  getextattr - manipulate extended attributes
• setfacl(1)
  setfacl - set ACL information
• setfib(1)
  setfib - execute a utility with an altered default network view
• setfib(2)
  setfib - set the default FIB (routing table) for the calling process.
• setfmac(8)
  setfmac - set MAC label for a file system object
• setfsent(3)
  getfsent - get file system descriptor file entry
• setfstab(3)
  getfsent - get file system descriptor file entry
• setfsmac(8)
  setfsmac - set MAC label for a file hierarchy
• setgid(2)
  setuid - set user and group ID
• setgroups(2)
  setgroups - set group access list
• setgrent(3)
  getgrent - group database operations
• setgroupent(3)
  getgrent - group database operations
• sethostent(3)
  gethostbyname - get network host entry
• sethostid(3)
  gethostid - get/set unique identifier of current host
• sethostname(3)
  gethostname - get/set name of current host
• setipv4sourcefilter(3)
  sourcefilter - advanced multicast group membership API
• setitimer(2)
  getitimer - get/set value of interval timer
• setjmp(3)
  sigsetjmp - non-local jumps
• setkey(8)
  setkey - manually manipulate the IPsec SA/SP database
• setlinebuf(3)
  setbuf - stream buffering operations
• setlogin(2)
  getlogin - get/set login name
• setloginclass(2)
  getloginclass - get/set login class
• setlocale(3)
  setlocale - natural language formatting for C
• setlogmask(3)
  syslog - control system log
• setmode(3)
  getmode - modify mode bits
• setnetconfig(3)
  getnetconfig - get network configuration database entry
• setnetent(3)
  getnetent - get network entry
• setnetgrent(3)
  getnetgrent - netgroup database operations
• setnetpath(3)
  getnetpath - get
• setpassent(3)
  getpwent - password database operations
• setpgid(2)
  setpgid - set process group
• setpgrp(2)
  setpgid - set process group
• setpmac(8)
  setpmac - run a command with a different MAC process label
• setpriority(2)
  getpriority - get/set program scheduling priority
• setproctitle(3)
  setproctitle - set process title
• setprogname(3)
  getprogname - get or set the program name
• setprotoent(3)
  getprotoent - get protocol entry
• setpwent(3)
  getpwent - password database operations
• setpwfile(3)
  getpwent - password database operations
• setregid(2)
  setregid - set real and effective group ID
• setresgid(2)
  getresgid - get or set real, effective and saved user or group ID
• setresuid(2)
  getresgid - get or set real, effective and saved user or group ID
• setreuid(2)
  setreuid - set real and effective user ID"s
• setrgid(3)
  setruid - set user and group ID
• setrlimit(2)
  getrlimit - control maximum system resource consumption
• setrpcent(3)
  getrpcent - get RPC entry
• setruid(3)
  setruid - set user and group ID
• setrunnable(9)
  curpriority_cmp - perform round-robin scheduling of runnable processes
• setrunqueue(9)
  choosethread - manage the queue of runnable processes
• setscrreg(3)
  clearok, idlok, idcok, immedok, leaveok, setscrreg, wsetscrreg, scrollok, nl, nonl - curses output options
• setservent(3)
  getservent - get service entry
• SETSETNEQ(9)
  signal - kernel signal functions
• SETSETOR(9)
  signal - kernel signal functions
• setsid(2)
  setsid - create session and set process group ID
• setsockopt(2)
  getsockopt - get and set options on sockets
• setsourcefilter(3)
  sourcefilter - advanced multicast group membership API
• setstate(3)
  random - better random number generator; routines for changing generators
• setsyx(3)
  def_prog_mode, def_shell_mode, reset_prog_mode, reset_shell_mode, resetty, savetty, getsyx, setsyx, ripoffline, curs_set, napms - low-level curses routines
• settc(1)
  builtin - shell built-in commands
• setterm(3)
  del_curterm, mvcur, putp, restartterm, set_curterm, setterm, setupterm, tigetflag, tigetnum, tigetstr, tparm, tputs, vid_attr, vid_puts, vidattr, vidputs - curses interfaces to terminfo database
• settimeofday(2)
  gettimeofday - get/set date and time
• setttyent(3)
  getttyent - ttys(5)
• setty(1)
  builtin - shell built-in commands
• setuid(2)
  setuid - set user and group ID
• setupterm(3)
  del_curterm, mvcur, putp, restartterm, set_curterm, setterm, setupterm, tigetflag, tigetnum, tigetstr, tparm, tputs, vid_attr, vid_puts, vidattr, vidputs - curses interfaces to terminfo database
• setusercontext(3)
  setclasscontext - functions for using the login class capabilities database
• setusershell(3)
  getusershell - get valid user shells
• setutxdb(3)
  endutxent - user accounting database functions
• setutxent(3)
  endutxent - user accounting database functions
• setvar(1)
  builtin - shell built-in commands
• setvbuf(3)
  setbuf - stream buffering operations
• set_current_field(3)
  form_page - set and get form page number
• set_current_item(3)
  mitem_current - set and get current_menu_item
• set_curterm(3)
  del_curterm, mvcur, putp, restartterm, set_curterm, setterm, setupterm, tigetflag, tigetnum, tigetstr, tparm, tputs, vid_attr, vid_puts, vidattr, vidputs - curses interfaces to terminfo database
• set_escdelay(3)
  use_screen, use_window - curses thread support
• set_fieldtype_arg(3)
  form_fieldtype - define validation-field types
• set_fieldtype_choice(3)
  form_fieldtype - define validation-field types
• set_field_back(3)
  form_field_attributes - color and attribute control for form fields
• set_field_buffer(3)
  form_field_buffer - field buffer control
• set_field_fore(3)
  form_field_attributes - color and attribute control for form fields
• set_field_init(3)
  form_hook - set hooks for automatic invocation by applications
• set_field_just(3)
  form_field_just - retrieve field characteristics
• set_field_pad(3)
  form_field_attributes - color and attribute control for form fields
• set_field_status(3)
  form_field_buffer - field buffer control
• set_field_term(3)
  form_hook - set hooks for automatic invocation by applications
• set_field_type(3)
  form_field_validation - data type validation for fields
• set_field_userptr(3)
  form_field_userptr - associate application data with a form field
• set_form_fields(3)
  form_field - make and break connections between fields and forms
• set_form_init(3)
  form_hook - set hooks for automatic invocation by applications
• set_form_opts(3)
  form_opts - set and get form options
• set_form_page(3)
  form_page - set and get form page number
• set_form_sub(3)
  form_win - make and break form window and subwindow associations
• set_form_term(3)
  form_hook - set hooks for automatic invocation by applications
• set_form_userptr(3)
  form_userptr - associate application data with a form item
• set_form_win(3)
  form_win - make and break form window and subwindow associations
• set_item_init(3)
  menu_hook - set hooks for automatic invocation by applications
• set_item_opts(3)
  mitem_opts - set and get menu item options
• set_item_term(3)
  menu_hook - set hooks for automatic invocation by applications
• set_item_userptr(3)
  mitem_userptr - associate application data with a menu item
• set_item_value(3)
  mitem_value - set and get menu item values
• set_max_field(3)
  form_field_buffer - field buffer control
• set_menu_back(3)
  menu_attributes - color and attribute control for menus
• set_menu_fore(3)
  menu_attributes - color and attribute control for menus
• set_menu_format(3)
  menu_format - set and get menu sizes
• set_menu_grey(3)
  menu_attributes - color and attribute control for menus
• set_menu_init(3)
  menu_hook - set hooks for automatic invocation by applications
• set_menu_items(3)
  menu_items - make and break connections between items and menus
• set_menu_mark(3)
  menu_mark - get and set the menu mark string
• set_menu_opts(3)
  menu_opts - set and get menu options
• set_menu_pad(3)
  menu_attributes - color and attribute control for menus
• set_menu_pattern(3)
  menu_pattern - get and set a menu"s pattern buffer
• set_menu_spacing(3)
  menu_spacing - Control spacing between menu items.
• set_menu_sub(3)
  menu_win - make and break menu window and subwindow associations
• set_menu_term(3)
  menu_hook - set hooks for automatic invocation by applications
• set_menu_userptr(3)
  menu_userptr - associate application data with a menu item
• set_menu_win(3)
  menu_win - make and break menu window and subwindow associations
• set_new_page(3)
  form_new_page - form pagination functions
• set_panel_userptr(3)
  panel - panel stack extension for curses
• set_tabsize(3)
  use_screen, use_window - curses thread support
• set_term(3)
  initscr, newterm, endwin, isendwin, set_term, delscreen - curses screen initialization and manipulation routines
• set_top_row(3)
  mitem_current - set and get current_menu_item
• sf(4)
  sf - Adaptec AIC-6915 "Starfire" PCI Fast Ethernet adapter driver
• sftp(1)
  sftp - secure file transfer program
• sftp-server(8)
  sftp-server - SFTP server subsystem
• sfxge(4)
  sfxge - Solarflare 10Gb Ethernet adapter driver
• sf_buf(9)
  sf_buf - manage temporary kernel address space mapping for memory pages
• sf_buf_alloc(9)
  sf_buf - manage temporary kernel address space mapping for memory pages
• sf_buf_free(9)
  sf_buf - manage temporary kernel address space mapping for memory pages
• sf_buf_kva(9)
  sf_buf - manage temporary kernel address space mapping for memory pages
• sf_buf_page(9)
  sf_buf - manage temporary kernel address space mapping for memory pages
• sge(4)
  sge - Silicon Integrated Systems SiS190/191 Fast/Gigabit Ethernet driver
• sgi2tiff(1)
  sgi2tiff - create a TIFF file from an SGI image file
• sglist(9)
  sglist - manage a scatter/gather list of physical memory addresses
• sglist_alloc(9)
  sglist - manage a scatter/gather list of physical memory addresses
• sglist_append(9)
  sglist - manage a scatter/gather list of physical memory addresses
• sglist_append_mbuf(9)
  sglist - manage a scatter/gather list of physical memory addresses
• sglist_append_phys(9)
  sglist - manage a scatter/gather list of physical memory addresses
• sglist_append_uio(9)
  sglist - manage a scatter/gather list of physical memory addresses
• sglist_append_user(9)
  sglist - manage a scatter/gather list of physical memory addresses
• sglist_build(9)
  sglist - manage a scatter/gather list of physical memory addresses
• sglist_clone(9)
  sglist - manage a scatter/gather list of physical memory addresses
• sglist_consume_uio(9)
  sglist - manage a scatter/gather list of physical memory addresses
• sglist_count(9)
  sglist - manage a scatter/gather list of physical memory addresses
• sglist_free(9)
  sglist - manage a scatter/gather list of physical memory addresses
• sglist_hold(9)
  sglist - manage a scatter/gather list of physical memory addresses
• sglist_init(9)
  sglist - manage a scatter/gather list of physical memory addresses
• sglist_join(9)
  sglist - manage a scatter/gather list of physical memory addresses
• sglist_length(9)
  sglist - manage a scatter/gather list of physical memory addresses
• sglist_reset(9)
  sglist - manage a scatter/gather list of physical memory addresses
• sglist_slice(9)
  sglist - manage a scatter/gather list of physical memory addresses
• sglist_split(9)
  sglist - manage a scatter/gather list of physical memory addresses
• sh(1)
  sh - command interpreter (shell)
• sha(3)
  SHA_Init - calculate the FIPS 160 and 160-1 ``SHA"" message digests
• sha1(1)
  md5 - calculate a message-digest fingerprint (checksum) for a file
• SHA1_Data(3)
  SHA_Init - calculate the FIPS 160 and 160-1 ``SHA"" message digests
• SHA1_End(3)
  SHA_Init - calculate the FIPS 160 and 160-1 ``SHA"" message digests
• SHA1_File(3)
  SHA_Init - calculate the FIPS 160 and 160-1 ``SHA"" message digests
• SHA1_FileChunk(3)
  SHA_Init - calculate the FIPS 160 and 160-1 ``SHA"" message digests
• SHA1_Final(3)
  SHA_Init - calculate the FIPS 160 and 160-1 ``SHA"" message digests
• SHA1_Init(3)
  SHA_Init - calculate the FIPS 160 and 160-1 ``SHA"" message digests
• SHA1_Update(3)
  SHA_Init - calculate the FIPS 160 and 160-1 ``SHA"" message digests
• sha256(1)
  md5 - calculate a message-digest fingerprint (checksum) for a file
• sha256(3)
  SHA256_Init - calculate the FIPS 180-2 ``SHA-256"" message digest
• SHA256_Data(3)
  SHA256_Init - calculate the FIPS 180-2 ``SHA-256"" message digest
• SHA256_End(3)
  SHA256_Init - calculate the FIPS 180-2 ``SHA-256"" message digest
• SHA256_File(3)
  SHA256_Init - calculate the FIPS 180-2 ``SHA-256"" message digest
• SHA256_FileChunk(3)
  SHA256_Init - calculate the FIPS 180-2 ``SHA-256"" message digest
• SHA256_Final(3)
  SHA256_Init - calculate the FIPS 180-2 ``SHA-256"" message digest
• SHA256_Init(3)
  SHA256_Init - calculate the FIPS 180-2 ``SHA-256"" message digest
• SHA256_Update(3)
  SHA256_Init - calculate the FIPS 180-2 ``SHA-256"" message digest
• sha512(3)
  SHA512_Init - calculate the FIPS 180-2 ``SHA-512"" message digest
• SHA512_Data(3)
  SHA512_Init - calculate the FIPS 180-2 ``SHA-512"" message digest
• SHA512_End(3)
  SHA512_Init - calculate the FIPS 180-2 ``SHA-512"" message digest
• SHA512_File(3)
  SHA512_Init - calculate the FIPS 180-2 ``SHA-512"" message digest
• SHA512_FileChunk(3)
  SHA512_Init - calculate the FIPS 180-2 ``SHA-512"" message digest
• SHA512_Final(3)
  SHA512_Init - calculate the FIPS 180-2 ``SHA-512"" message digest
• SHA512_Init(3)
  SHA512_Init - calculate the FIPS 180-2 ``SHA-512"" message digest
• SHA512_Update(3)
  SHA512_Init - calculate the FIPS 180-2 ``SHA-512"" message digest
• shar(1)
  shar - create a shell archive of files
• shasum(1)
  shasum - Print or Check SHA Checksums
• SHA_Data(3)
  SHA_Init - calculate the FIPS 160 and 160-1 ``SHA"" message digests
• SHA_End(3)
  SHA_Init - calculate the FIPS 160 and 160-1 ``SHA"" message digests
• SHA_File(3)
  SHA_Init - calculate the FIPS 160 and 160-1 ``SHA"" message digests
• SHA_FileChunk(3)
  SHA_Init - calculate the FIPS 160 and 160-1 ``SHA"" message digests
• SHA_Final(3)
  SHA_Init - calculate the FIPS 160 and 160-1 ``SHA"" message digests
• SHA_Init(3)
  SHA_Init - calculate the FIPS 160 and 160-1 ``SHA"" message digests
• SHA_Update(3)
  SHA_Init - calculate the FIPS 160 and 160-1 ``SHA"" message digests
• shells(5)
  shells - shell database
• shift(1)
  builtin - shell built-in commands
• shmat(2)
  shmat - attach or detach shared memory
• shmctl(2)
  shmctl - shared memory control
• shmdt(2)
  shmat - attach or detach shared memory
• shmget(2)
  shmget - obtain a shared memory identifier
• shm_open(2)
  shm_open - shared memory object operations
• shm_unlink(2)
  shm_open - shared memory object operations
• showmount(8)
  showmount - show remote nfs mounts on host
• show_panel(3)
  panel - panel stack extension for curses
• shutdown(2)
  shutdown - disable sends and/or receives on a socket
• shutdown(8)
  shutdown - close down the system at a given time
• si(4)
  si - driver for Specialix International SI/XIO or SX intelligent serial card
• siba(4)
  siba - Sonic Inc. Silicon Backplane driver
• sicontrol(8)
  sicontrol - Specialix SI/XIO driver configuration and debugging
• siftr(4)
  SIFTR - Statistical Information For TCP Research
• sigaction(2)
  sigaction - software signal facilities
• sigaddset(3)
  sigemptyset - manipulate signal sets
• SIGADDSET(9)
  signal - kernel signal functions
• sigaltstack(2)
  sigaltstack - set and/or get signal stack context
• sigblock(2)
  sigsetmask - manipulate current signal mask
• sigdelset(3)
  sigemptyset - manipulate signal sets
• SIGDELSET(9)
  signal - kernel signal functions
• sigemptyset(3)
  sigemptyset - manipulate signal sets
• SIGEMPTYSET(9)
  signal - kernel signal functions
• sigexit(9)
  signal - kernel signal functions
• sigfillset(3)
  sigemptyset - manipulate signal sets
• SIGFILLSET(9)
  signal - kernel signal functions
• sighold(2)
  sighold - legacy interface for signal management
• sigignore(2)
  sighold - legacy interface for signal management
• siginfo(3)
  siginfo - signal generation information
• siginterrupt(3)
  siginterrupt - allow signals to interrupt system calls
• siginit(9)
  signal - kernel signal functions
• sigismember(3)
  sigemptyset - manipulate signal sets
• SIGISEMPTY(9)
  signal - kernel signal functions
• SIGISMEMBER(9)
  signal - kernel signal functions
• siglongjmp(3)
  sigsetjmp - non-local jumps
• sigmask(2)
  sigsetmask - manipulate current signal mask
• signal(3)
  signal - simplified software signal facilities
• signal(9)
  signal - kernel signal functions
• signbit(3)
  signbit - determine whether a floating-point number"s sign is negative
• significand(3)
  scalb - IEEE test functions
• significandf(3)
  scalb - IEEE test functions
• SIGNOTEMPTY(9)
  signal - kernel signal functions
• signotify(9)
  signal - kernel signal functions
• sigpause(2)
  sighold - legacy interface for signal management
• sigpending(2)
  sigpending - get pending signals
• SIGPENDING(9)
  signal - kernel signal functions
• sigprocmask(2)
  sigprocmask - manipulate current signal mask
• sigqueue(2)
  sigqueue - queue a signal to a process (REALTIME)
• sigrelse(2)
  sighold - legacy interface for signal management
• sigreturn(2)
  sigreturn - return from signal
• sigset(2)
  sighold - legacy interface for signal management
• sigsetmask(2)
  sigsetmask - manipulate current signal mask
• sigsetjmp(3)
  sigsetjmp - non-local jumps
• sigsetops(3)
  sigemptyset - manipulate signal sets
• SIGSETAND(9)
  signal - kernel signal functions
• SIGSETCANTMASK(9)
  signal - kernel signal functions
• SIGSETEQ(9)
  signal - kernel signal functions
• SIGSETNAND(9)
  signal - kernel signal functions
• sigstack(2)
  sigstack - set and/or get signal stack context
• sigsuspend(2)
  sigsuspend - atomically release blocked signals and wait for interrupt
• sigtimedwait(2)
  sigtimedwait - wait for queued signals (REALTIME)
• sigtool(1)
  sigtool - signature and database management tool
• sigvec(2)
  sigvec - software signal facilities
• sigwait(2)
  sigwait - select a set of signals
• sigwaitinfo(2)
  sigtimedwait - wait for queued signals (REALTIME)
• SIG_CONTSIGMASK(9)
  signal - kernel signal functions
• SIG_STOPSIGMASK(9)
  signal - kernel signal functions
• siis(4)
  siis - SiliconImage Serial ATA Host Controller driver
• simplebus(4)
  simplebus - ePAPR simple-bus driver
• sin(3)
  sin - sine functions
• sinf(3)
  sin - sine functions
• sinh(3)
  sinh - hyperbolic sine function
• sinhf(3)
  sinh - hyperbolic sine function
• sinl(3)
  sin - sine functions
• sio(4)
  sio - fast interrupt driven asynchronous serial communications interface
• sis(4)
  sis - SiS 900, SiS 7016 and NS DP83815/DP83816 Fast Ethernet device driver
• size(1)
  size - list section sizes and total size.
• sk(4)
  sk - SysKonnect SK-984x and SK-982x PCI Gigabit Ethernet adapter driver
• skey(4)
  OPIE - One-time Passwords In Everything
• sleep(1)
  sleep - suspend execution for an interval of time
• sleep(3)
  sleep - suspend process execution for an interval measured in seconds
• sleep(9)
  msleep - wait for events
• sleepqueue(9)
  init_sleepqueues - manage the queues of sleeping threads
• sleepq_abort(9)
  init_sleepqueues - manage the queues of sleeping threads
• sleepq_add(9)
  init_sleepqueues - manage the queues of sleeping threads
• sleepq_alloc(9)
  init_sleepqueues - manage the queues of sleeping threads
• sleepq_broadcast(9)
  init_sleepqueues - manage the queues of sleeping threads
• sleepq_calc_signal_retval(9)
  init_sleepqueues - manage the queues of sleeping threads
• sleepq_catch_signals(9)
  init_sleepqueues - manage the queues of sleeping threads
• sleepq_free(9)
  init_sleepqueues - manage the queues of sleeping threads
• sleepq_lookup(9)
  init_sleepqueues - manage the queues of sleeping threads
• sleepq_release(9)
  init_sleepqueues - manage the queues of sleeping threads
• sleepq_remove(9)
  init_sleepqueues - manage the queues of sleeping threads
• sleepq_set_timeout(9)
  init_sleepqueues - manage the queues of sleeping threads
• sleepq_signal(9)
  init_sleepqueues - manage the queues of sleeping threads
• sleepq_timedwait(9)
  init_sleepqueues - manage the queues of sleeping threads
• sleepq_timedwait_sig(9)
  init_sleepqueues - manage the queues of sleeping threads
• sleepq_wait(9)
  init_sleepqueues - manage the queues of sleeping threads
• sleepq_wait_sig(9)
  init_sleepqueues - manage the queues of sleeping threads
• SLIST_EMPTY(3)
  SLIST_EMPTY - implementations of singly-linked lists, singly-linked tail queues, lists and tail queues
• SLIST_ENTRY(3)
  SLIST_EMPTY - implementations of singly-linked lists, singly-linked tail queues, lists and tail queues
• SLIST_FIRST(3)
  SLIST_EMPTY - implementations of singly-linked lists, singly-linked tail queues, lists and tail queues
• SLIST_FOREACH(3)
  SLIST_EMPTY - implementations of singly-linked lists, singly-linked tail queues, lists and tail queues
• SLIST_FOREACH_SAFE(3)
  SLIST_EMPTY - implementations of singly-linked lists, singly-linked tail queues, lists and tail queues
• SLIST_HEAD(3)
  SLIST_EMPTY - implementations of singly-linked lists, singly-linked tail queues, lists and tail queues
• SLIST_HEAD_INITIALIZER(3)
  SLIST_EMPTY - implementations of singly-linked lists, singly-linked tail queues, lists and tail queues
• SLIST_INIT(3)
  SLIST_EMPTY - implementations of singly-linked lists, singly-linked tail queues, lists and tail queues
• SLIST_INSERT_AFTER(3)
  SLIST_EMPTY - implementations of singly-linked lists, singly-linked tail queues, lists and tail queues
• SLIST_INSERT_HEAD(3)
  SLIST_EMPTY - implementations of singly-linked lists, singly-linked tail queues, lists and tail queues
• SLIST_NEXT(3)
  SLIST_EMPTY - implementations of singly-linked lists, singly-linked tail queues, lists and tail queues
• SLIST_REMOVE(3)
  SLIST_EMPTY - implementations of singly-linked lists, singly-linked tail queues, lists and tail queues
• SLIST_REMOVE_AFTER(3)
  SLIST_EMPTY - implementations of singly-linked lists, singly-linked tail queues, lists and tail queues
• SLIST_REMOVE_HEAD(3)
  SLIST_EMPTY - implementations of singly-linked lists, singly-linked tail queues, lists and tail queues
• SLIST_SWAP(3)
  SLIST_EMPTY - implementations of singly-linked lists, singly-linked tail queues, lists and tail queues
• slk_attr(3)
  slk_init, slk_set, slk_refresh, slk_noutrefresh, slk_label, slk_clear, slk_restore, slk_touch, slk_attron, slk_attrset, slk_attroff, slk_attr_on, slk_attr_set, slk_attr_off, slk_attr, slk_color - curses soft label routines
• slk_attroff(3)
  slk_init, slk_set, slk_refresh, slk_noutrefresh, slk_label, slk_clear, slk_restore, slk_touch, slk_attron, slk_attrset, slk_attroff, slk_attr_on, slk_attr_set, slk_attr_off, slk_attr, slk_color - curses soft label routines
• slk_attron(3)
  slk_init, slk_set, slk_refresh, slk_noutrefresh, slk_label, slk_clear, slk_restore, slk_touch, slk_attron, slk_attrset, slk_attroff, slk_attr_on, slk_attr_set, slk_attr_off, slk_attr, slk_color - curses soft label routines
• slk_attrset(3)
  slk_init, slk_set, slk_refresh, slk_noutrefresh, slk_label, slk_clear, slk_restore, slk_touch, slk_attron, slk_attrset, slk_attroff, slk_attr_on, slk_attr_set, slk_attr_off, slk_attr, slk_color - curses soft label routines
• slk_attr_off(3)
  slk_init, slk_set, slk_refresh, slk_noutrefresh, slk_label, slk_clear, slk_restore, slk_touch, slk_attron, slk_attrset, slk_attroff, slk_attr_on, slk_attr_set, slk_attr_off, slk_attr, slk_color - curses soft label routines
• slk_attr_on(3)
  slk_init, slk_set, slk_refresh, slk_noutrefresh, slk_label, slk_clear, slk_restore, slk_touch, slk_attron, slk_attrset, slk_attroff, slk_attr_on, slk_attr_set, slk_attr_off, slk_attr, slk_color - curses soft label routines
• slk_attr_set(3)
  slk_init, slk_set, slk_refresh, slk_noutrefresh, slk_label, slk_clear, slk_restore, slk_touch, slk_attron, slk_attrset, slk_attroff, slk_attr_on, slk_attr_set, slk_attr_off, slk_attr, slk_color - curses soft label routines
• slk_clear(3)
  slk_init, slk_set, slk_refresh, slk_noutrefresh, slk_label, slk_clear, slk_restore, slk_touch, slk_attron, slk_attrset, slk_attroff, slk_attr_on, slk_attr_set, slk_attr_off, slk_attr, slk_color - curses soft label routines
• slk_color(3)
  slk_init, slk_set, slk_refresh, slk_noutrefresh, slk_label, slk_clear, slk_restore, slk_touch, slk_attron, slk_attrset, slk_attroff, slk_attr_on, slk_attr_set, slk_attr_off, slk_attr, slk_color - curses soft label routines
• slk_init(3)
  slk_init, slk_set, slk_refresh, slk_noutrefresh, slk_label, slk_clear, slk_restore, slk_touch, slk_attron, slk_attrset, slk_attroff, slk_attr_on, slk_attr_set, slk_attr_off, slk_attr, slk_color - curses soft label routines
• slk_label(3)
  slk_init, slk_set, slk_refresh, slk_noutrefresh, slk_label, slk_clear, slk_restore, slk_touch, slk_attron, slk_attrset, slk_attroff, slk_attr_on, slk_attr_set, slk_attr_off, slk_attr, slk_color - curses soft label routines
• slk_noutrefresh(3)
  slk_init, slk_set, slk_refresh, slk_noutrefresh, slk_label, slk_clear, slk_restore, slk_touch, slk_attron, slk_attrset, slk_attroff, slk_attr_on, slk_attr_set, slk_attr_off, slk_attr, slk_color - curses soft label routin
• slk_refresh(3)
  slk_init, slk_set, slk_refresh, slk_noutrefresh, slk_label, slk_clear, slk_restore, slk_touch, slk_attron, slk_attrset, slk_attroff, slk_attr_on, slk_attr_set, slk_attr_off, slk_attr, slk_color - curses soft label routines
• slk_restore(3)
  slk_init, slk_set, slk_refresh, slk_noutrefresh, slk_label, slk_clear, slk_restore, slk_touch, slk_attron, slk_attrset, slk_attroff, slk_attr_on, slk_attr_set, slk_attr_off, slk_attr, slk_color - curses soft label routines
• slk_set(3)
  slk_init, slk_set, slk_refresh, slk_noutrefresh, slk_label, slk_clear, slk_restore, slk_touch, slk_attron, slk_attrset, slk_attroff, slk_attr_on, slk_attr_set, slk_attr_off, slk_attr, slk_color - curses soft label routines
• slk_touch(3)
  slk_init, slk_set, slk_refresh, slk_noutrefresh, slk_label, slk_clear, slk_restore, slk_touch, slk_attron, slk_attrset, slk_attroff, slk_attr_on, slk_attr_set, slk_attr_off, slk_attr, slk_color - curses soft label routines
• slogin(1)
  ssh - OpenSSH SSH client (remote login program)
• slsh(1)
  slsh - Interpreter for S-Lang scripts
• sl_add(3)
  stringlist - stringlist manipulation functions
• sl_find(3)
  stringlist - stringlist manipulation functions
• sl_free(3)
  stringlist - stringlist manipulation functions
• sl_init(3)
  stringlist - stringlist manipulation functions
• smb(4)
  smb - SMB generic I/O device driver
• smbmsg(8)
  smbmsg - send or receive messages over an SMBus
• smbus(4)
  smbus - System Management Bus
• smbutil(1)
  smbutil - interface to the SMB requester
• SMP(4)
  SMP - description of the FreeBSD Symmetric Multi-Processor kernel
• smrsh(8)
  smrsh - restricted shell for sendmail
• sn(4)
  sn - Ethernet driver for SMC91Cxx based cards
• snapinfo(8)
  snapinfo - show snapshot location on UFS file systems
• snd(4)
  sound - FreeBSD
• snd_ad1816(4)
  snd_ad1816 - Analog Devices AD1816 ISA bridge device driver
• snd_ak452x(4)
  snd_envy24 - VIA Envy24 and compatible bridge device driver
• snd_als4000(4)
  snd_als4000 - Avance Logic ALS4000 PCI bridge device driver
• snd_atiixp(4)
  snd_atiixp - ATI IXP bridge device driver
• snd_cmi(4)
  snd_cmi - CMedia CMI8338/CMI8738 PCI bridge device driver
• snd_cs4281(4)
  snd_cs4281 - Crystal Semiconductor CS4281 PCI bridge device driver
• snd_csa(4)
  snd_csa - Crystal Semiconductor CS461x/462x/4280 PCI bridge device driver
• snd_ds1(4)
  snd_ds1 - Yamaha DS-1 PCI bridge device driver
• snd_emu10k1(4)
  snd_emu10k1 - SoundBlaster Live! and Audigy PCI bridge device driver
• snd_emu10kx(4)
  snd_emu10kx - Creative SoundBlaster Live! and Audigy sound cards device driver
• snd_envy24(4)
  snd_envy24 - VIA Envy24 and compatible bridge device driver
• snd_envy24ht(4)
  snd_envy24ht - VIA Envy24HT and compatible bridge device driver
• snd_es137x(4)
  snd_es137x - Ensoniq AudioPCI ES137x bridge device driver
• snd_ess(4)
  snd_ess - Ensoniq ESS ISA PnP/non-PnP bridge device driver
• snd_fm801(4)
  snd_fm801 - Forte Media FM801 bridge device driver
• snd_gusc(4)
  snd_gusc - Gravis UltraSound ISA bridge device driver
• snd_hda(4)
  snd_hda - Intel High Definition Audio bridge device driver
• snd_ich(4)
  snd_ich - Intel ICH AC"97 and compatible bridge device driver
• snd_maestro(4)
  snd_maestro - ESS Maestro bridge device driver
• snd_maestro3(4)
  snd_maestro3 - ESS Maestro3/Allegro-1 bridge device driver
• snd_mss(4)
  snd_mss - Microsoft Sound System ISA PnP/non-PnP bridge device driver
• snd_neomagic(4)
  snd_neomagic - NeoMagic 256AV/ZX bridge device driver
• snd_sb16(4)
  snd_sbc - Creative Sound Blaster ISA and compatible bridge device driver
• snd_sb8(4)
  snd_sbc - Creative Sound Blaster ISA and compatible bridge device driver
• snd_sbc(4)
  snd_sbc - Creative Sound Blaster ISA and compatible bridge device driver
• snd_solo(4)
  snd_solo - ESS Solo-1/1E PCI bridge device driver
• snd_spicds(4)
  snd_spicds - I2S SPI audio codec driver
• snd_t4dwave(4)
  snd_t4dwave - Trident 4DWave bridge device driver
• snd_uaudio(4)
  snd_uaudio - USB audio and MIDI device driver
• snd_via8233(4)
  snd_via8233 - VIA Technologies VT8233 bridge device driver
• snd_via82c686(4)
  snd_via82c686 - VIA Technologies 82C686A bridge device driver
• snd_vibes(4)
  snd_vibes - S3 SonicVibes bridge device driver
• snmpmod(3)
  INSERT_OBJECT_OID_LINK_INDEX - SNMP daemon loadable module interface
• snmp_atm(3)
  atmif_event_f - ATM driver module for snmpd.
• snmp_bridge(3)
  snmp_bridge - bridge module for snmpd
• snmp_hostres(3)
  snmp_hostres - host resources module for
• snmp_mibII(3)
  mibII - mib-2 module for bsnmpd.
• snmp_netgraph(3)
  snmp_netgraph - netgraph module for snmpd.
• snmp_target(3)
  snmp_target - Target addresses and notifications module for
• snmp_usm(3)
  snmp_usm - user-based security module for
• snmp_vacm(3)
  snmp_vacm - View-based Access Control module for
• snmp_wlan(3)
  snmp_wlan - wireless networking module for
• snp(4)
  snp - tty snoop interface
• snprintf(3)
  printf - formatted output conversion
• sobind(9)
  socket - kernel socket interface
• sockatmark(3)
  sockatmark - determine whether the read pointer is at the OOB mark
• socket(2)
  socket - create an endpoint for communication
• socketpair(2)
  socketpair - create a pair of connected sockets
• socket(9)
  socket - kernel socket interface
• sockstat(1)
  sockstat - list open sockets
• soclose(9)
  socket - kernel socket interface
• soconnect(9)
  socket - kernel socket interface
• socreate(9)
  socket - kernel socket interface
• soelim(1)
  soelim - interpret .so requests in groff input
• sogetopt(9)
  socket - kernel socket interface
• soreceive(9)
  socket - kernel socket interface
• sort(1)
  sort - sort lines of text files
• sosend(9)
  socket - kernel socket interface
• sosetopt(9)
  socket - kernel socket interface
• soshutdown(9)
  socket - kernel socket interface
• sound(4)
  sound - FreeBSD
• source(1)
  builtin - shell built-in commands
• sourcefilter(3)
  sourcefilter - advanced multicast group membership API
• spamassassin-run(1)
  spamassassin - simple front-end filtering script for SpamAssassin
• spamassassin(1)
  spamassassin - extensible email filter used to identify spam
• spamc(1)
  spamc - client for spamd
• spamd(1)
  spamd - daemonized version of spamassassin
• speaker(4)
  speaker - console speaker device driver
• spic(4)
  spic - Sony Programmable I/O Controller device driver
• spkr(4)
  speaker - console speaker device driver
• spkrtest(8)
  spkrtest - test script for the speaker driver
• spl(9)
  splbio - manipulate interrupt priorities
• spl0(9)
  splbio - manipulate interrupt priorities
• splain(1)
  diagnostics, splain - produce verbose warning diagnostics
• splash(4)
  splash - splash screen / screen saver interface
• SPLAY_EMPTY(3)
  SPLAY_PROTOTYPE - implementations of splay and red-black trees
• SPLAY_ENTRY(3)
  SPLAY_PROTOTYPE - implementations of splay and red-black trees
• SPLAY_FIND(3)
  SPLAY_PROTOTYPE - implementations of splay and red-black trees
• SPLAY_FOREACH(3)
  SPLAY_PROTOTYPE - implementations of splay and red-black trees
• SPLAY_GENERATE(3)
  SPLAY_PROTOTYPE - implementations of splay and red-black trees
• SPLAY_HEAD(3)
  SPLAY_PROTOTYPE - implementations of splay and red-black trees
• SPLAY_INIT(3)
  SPLAY_PROTOTYPE - implementations of splay and red-black trees
• SPLAY_INITIALIZER(3)
  SPLAY_PROTOTYPE - implementations of splay and red-black trees
• SPLAY_INSERT(3)
  SPLAY_PROTOTYPE - implementations of splay and red-black trees
• SPLAY_LEFT(3)
  SPLAY_PROTOTYPE - implementations of splay and red-black trees
• SPLAY_MAX(3)
  SPLAY_PROTOTYPE - implementations of splay and red-black trees
• SPLAY_MIN(3)
  SPLAY_PROTOTYPE - implementations of splay and red-black trees
• SPLAY_NEXT(3)
  SPLAY_PROTOTYPE - implementations of splay and red-black trees
• SPLAY_PROTOTYPE(3)
  SPLAY_PROTOTYPE - implementations of splay and red-black trees
• SPLAY_REMOVE(3)
  SPLAY_PROTOTYPE - implementations of splay and red-black trees
• SPLAY_RIGHT(3)
  SPLAY_PROTOTYPE - implementations of splay and red-black trees
• SPLAY_ROOT(3)
  SPLAY_PROTOTYPE - implementations of splay and red-black trees
• splbio(9)
  splbio - manipulate interrupt priorities
• splclock(9)
  splbio - manipulate interrupt priorities
• splhigh(9)
  splbio - manipulate interrupt priorities
• splimp(9)
  splbio - manipulate interrupt priorities
• split(1)
  split - split a file into pieces
• splnet(9)
  splbio - manipulate interrupt priorities
• splsoftclock(9)
  splbio - manipulate interrupt priorities
• splsofttty(9)
  splbio - manipulate interrupt priorities
• splstatclock(9)
  splbio - manipulate interrupt priorities
• spltty(9)
  splbio - manipulate interrupt priorities
• splvm(9)
  splbio - manipulate interrupt priorities
• splx(9)
  splbio - manipulate interrupt priorities
• sppp(4)
  sppp - point to point protocol network layer for synchronous lines
• spppcontrol(8)
  spppcontrol - display or set parameters for an sppp interface
• spray(8)
  spray - send many packets to host
• sprintf(3)
  printf - formatted output conversion
• sprog(7)
  sprog - secure programming practices
• sqlite3(1)
  sqlite3 - A command line interface for SQLite version 3
• sqrt(3)
  cbrt - cube root and square root functions
• sqrtf(3)
  cbrt - cube root and square root functions
• sqrtl(3)
  cbrt - cube root and square root functions
• sradixsort(3)
  radixsort - radix sort
• srand(3)
  rand - bad random number generator
• srand48(3)
  drand48 - pseudo random number generators and initialization routines
• sranddev(3)
  rand - bad random number generator
• srandom(3)
  random - better random number generator; routines for changing generators
• srandomdev(3)
  random - better random number generator; routines for changing generators
• srandom(9)
  arc4rand - supply pseudo-random numbers
• src.conf(5)
  src.conf - source build options
• sscanf(3)
  scanf - input format conversion
• sscop(1)
  sscop - SSCOP transport protocol
• ssh(1)
  ssh - OpenSSH SSH client (remote login program)
• ssh-add(1)
  ssh-add - adds private key identities to the authentication agent
• ssh-agent(1)
  ssh-agent - authentication agent
• ssh-keygen(1)
  ssh-keygen - authentication key generation, management and conversion
• ssh-keyscan(1)
  ssh-keyscan - gather ssh public keys
• ssh-keysign(8)
  ssh-keysign - ssh helper program for host-based authentication
• ssh-pkcs11-helper(8)
  ssh-pkcs11-helper - ssh-agent helper program for PKCS#11 support
• sshd(8)
  sshd - OpenSSH SSH daemon
• sshd_config(5)
  sshd_config - OpenSSH SSH daemon configuration file
• ssh_config(5)
  ssh_config - OpenSSH SSH client configuration files
• stab(5)
  stab - symbol table types
• stablerestart(5)
  nfs-stablerestart - restart information for the NFSv4 server
• stack(9)
  stack - kernel thread stack tracing routines
• stack_copy(9)
  stack - kernel thread stack tracing routines
• stack_create(9)
  stack - kernel thread stack tracing routines
• stack_destroy(9)
  stack - kernel thread stack tracing routines
• stack_print(9)
  stack - kernel thread stack tracing routines
• stack_print_ddb(9)
  stack - kernel thread stack tracing routines
• stack_put(9)
  stack - kernel thread stack tracing routines
• stack_save(9)
  stack - kernel thread stack tracing routines
• stack_sbuf_print(9)
  stack - kernel thread stack tracing routines
• stack_sbuf_print_ddb(9)
  stack - kernel thread stack tracing routines
• stack_zero(9)
  stack - kernel thread stack tracing routines
• STAILQ_CONCAT(3)
  SLIST_EMPTY - implementations of singly-linked lists, singly-linked tail queues, lists and tail queues
• STAILQ_EMPTY(3)
  SLIST_EMPTY - implementations of singly-linked lists, singly-linked tail queues, lists and tail queues
• STAILQ_ENTRY(3)
  SLIST_EMPTY - implementations of singly-linked lists, singly-linked tail queues, lists and tail queues
• STAILQ_FIRST(3)
  SLIST_EMPTY - implementations of singly-linked lists, singly-linked tail queues, lists and tail queues
• STAILQ_FOREACH(3)
  SLIST_EMPTY - implementations of singly-linked lists, singly-linked tail queues, lists and tail queues
• STAILQ_FOREACH_SAFE(3)
  SLIST_EMPTY - implementations of singly-linked lists, singly-linked tail queues, lists and tail queues
• STAILQ_HEAD(3)
  SLIST_EMPTY - implementations of singly-linked lists, singly-linked tail queues, lists and tail queues
• STAILQ_HEAD_INITIALIZER(3)
  SLIST_EMPTY - implementations of singly-linked lists, singly-linked tail queues, lists and tail queues
• STAILQ_INIT(3)
  SLIST_EMPTY - implementations of singly-linked lists, singly-linked tail queues, lists and tail queues
• STAILQ_INSERT_AFTER(3)
  SLIST_EMPTY - implementations of singly-linked lists, singly-linked tail queues, lists and tail queues
• STAILQ_INSERT_HEAD(3)
  SLIST_EMPTY - implementations of singly-linked lists, singly-linked tail queues, lists and tail queues
• STAILQ_INSERT_TAIL(3)
  SLIST_EMPTY - implementations of singly-linked lists, singly-linked tail queues, lists and tail queues
• STAILQ_LAST(3)
  SLIST_EMPTY - implementations of singly-linked lists, singly-linked tail queues, lists and tail queues
• STAILQ_NEXT(3)
  SLIST_EMPTY - implementations of singly-linked lists, singly-linked tail queues, lists and tail queues
• STAILQ_REMOVE(3)
  SLIST_EMPTY - implementations of singly-linked lists, singly-linked tail queues, lists and tail queues
• STAILQ_REMOVE_AFTER(3)
  SLIST_EMPTY - implementations of singly-linked lists, singly-linked tail queues, lists and tail queues
• STAILQ_REMOVE_HEAD(3)
  SLIST_EMPTY - implementations of singly-linked lists, singly-linked tail queues, lists and tail queues
• STAILQ_SWAP(3)
  SLIST_EMPTY - implementations of singly-linked lists, singly-linked tail queues, lists and tail queues
• standend(3)
  attroff, wattroff, attron, wattron, attrset, wattrset, color_set, wcolor_set, standend, wstandend, standout, wstandout, attr_get, wattr_get, attr_off, wattr_off, attr_on, wattr_on, attr_set, wattr_set, chgat, wchgat, mvc
• standout(3)
  attroff, wattroff, attron, wattron, attrset, wattrset, color_set, wcolor_set, standend, wstandend, standout, wstandout, attr_get, wattr_get, attr_off, wattr_off, attr_on, wattr_on, attr_set, wattr_set, chgat, wchgat, mvc
• start_color(3)
  start_color, init_pair, init_color, has_colors, can_change_color, color_content, pair_content, COLOR_PAIR - curses color manipulation routines
• stat(1)
  stat - display file status
• stat(2)
  stat - get file status
• statfs(2)
  statfs - get file system statistics
• statvfs(3)
  statvfs - retrieve file system information
• stdarg(3)
  stdarg - variable argument lists
• stderr(4)
  fd - file descriptor files
• stdin(4)
  fd - file descriptor files
• stdint(7)
  stdint - standard integer types
• stdio(3)
  stdio - standard input/output library functions
• stdout(4)
  fd - file descriptor files
• ste(4)
  ste - Sundance Technologies ST201 Fast Ethernet device driver
• stf(4)
  stf - 6to4 tunnel interface
• stg(4)
  stg - driver for Future Domain based SCSI controllers
• stge(4)
  stge - Sundance/Tamarack TC9021 Gigabit Ethernet adapter driver
• sticky(7)
  sticky - sticky text and append-only directories
• stop(1)
  builtin - shell built-in commands
• store(9)
  store - store data to user-space
• stpcpy(3)
  stpcpy, stpncpy, strcpy - copy strings
• stpncpy(3)
  stpcpy, stpncpy, strcpy - copy strings
• strcasecmp(3)
  strcasecmp - compare strings, ignoring case
• strcasestr(3)
  strstr - locate a substring in a string
• strcat(3)
  strcat - concatenate strings
• strchr(3)
  strchr - locate character in string
• strcmp(3)
  strcmp - compare strings
• strcoll(3)
  strcoll - compare strings according to current collation
• strcpy(3)
  stpcpy, stpncpy, strcpy - copy strings
• strcspn(3)
  strcspn - span the complement of a string
• strdup(3)
  strdup - save a copy of a string
• stream(1)
  stream - a lightweight tool to stream one or more pixel components of the image or portion of the image to your choice of storage formats.
• strerror(3)
  perror - system error messages
• strerror_r(3)
  perror - system error messages
• strfile(8)
  strfile - create a random access file for storing strings
• strfmon(3)
  strfmon - convert monetary value to string
• strftime(3)
  strftime - format date and time
• strings(1)
  strings - print the strings of printable characters in files.
• string(3)
  stpcpy - string specific functions
• stringlist(3)
  stringlist - stringlist manipulation functions
• strip(1)
  strip - Discard symbols from object files.
• strlcat(3)
  strlcpy - size-bounded string copying and concatenation
• strlcpy(3)
  strlcpy - size-bounded string copying and concatenation
• strlen(3)
  strlen, strnlen - find length of string
• strmode(3)
  strmode - convert inode status information into a symbolic string
• strncasecmp(3)
  strcasecmp - compare strings, ignoring case
• strncat(3)
  strcat - concatenate strings
• strncmp(3)
  strcmp - compare strings
• strncpy(3)
  stpcpy, stpncpy, strcpy - copy strings
• strndup(3)
  strdup - save a copy of a string
• strnlen(3)
  strlen, strnlen - find length of string
• strnstr(3)
  strstr - locate a substring in a string
• strpbrk(3)
  strpbrk - locate multiple characters in string
• strptime(3)
  strptime - parse date and time string
• strrchr(3)
  strchr - locate character in string
• strsep(3)
  strsep - separate strings
• strsignal(3)
  psignal - system signal messages
• strspn(3)
  strspn - span a string
• strstr(3)
  strstr - locate a substring in a string
• strtod(3)
  strtod - convert ASCII string to floating point
• strtof(3)
  strtod - convert ASCII string to floating point
• strtofflags(3)
  fflagstostr - convert between file flag bits and their string names
• strtoimax(3)
  strtol - convert a string value to a
• strtok(3)
  strtok - string tokens
• strtok_r(3)
  strtok - string tokens
• strtol(3)
  strtol - convert a string value to a
• strtold(3)
  strtod - convert ASCII string to floating point
• strtoll(3)
  strtol - convert a string value to a
• strtonum(3)
  strtonum - reliably convert string value to an integer
• strtoq(3)
  strtol - convert a string value to a
• strtoul(3)
  strtoul - convert a string to an
• strtoull(3)
  strtoul - convert a string to an
• strtoumax(3)
  strtoul - convert a string to an
• strtouq(3)
  strtoul - convert a string to an
• strunvis(3)
  unvis - decode a visual representation of characters
• strunvisx(3)
  unvis - decode a visual representation of characters
• strvis(3)
  vis - visually encode characters
• strvisx(3)
  vis - visually encode characters
• strxfrm(3)
  strxfrm - transform a string under locale
• stty(1)
  stty - set the options for a terminal device interface
• style.Makefile(5)
  style.Makefile - FreeBSD
• style(9)
  style - kernel source file style guide
• su(1)
  su - substitute user identity
• subpad(3)
  newpad, subpad, prefresh, pnoutrefresh, pechochar, pecho_wchar - create and display curses pads
• subwin(3)
  newwin, delwin, mvwin, subwin, derwin, mvderwin, dupwin, wsyncup, syncok, wcursyncup, wsyncdown - create curses windows
• subyte(9)
  store - store data to user-space
• sudo(8)
  sudo, sudoedit - execute a command as another user
• sudoers(5)
  sudoers - default sudo security policy module
• sudoreplay(8)
  sudoreplay - replay sudo session logs
• sudo_plugin(8)
  sudo_plugin - Sudo Plugin API
• suexec(8)
  suexec - Switch user before executing external programs
• sum(1)
  cksum - display file checksums and block counts
• suspend(1)
  builtin - shell built-in commands
• suswintr(9)
  store - store data to user-space
• suword(9)
  store - store data to user-space
• suword16(9)
  store - store data to user-space
• suword32(9)
  store - store data to user-space
• suword64(9)
  store - store data to user-space
• svcerr_auth(3)
  rpc_svc_err - library routines for server side remote procedure call errors
• svcerr_decode(3)
  rpc_svc_err - library routines for server side remote procedure call errors
• svcerr_noproc(3)
  rpc_svc_err - library routines for server side remote procedure call errors
• svcerr_noprog(3)
  rpc_svc_err - library routines for server side remote procedure call errors
• svcerr_progvers(3)
  rpc_svc_err - library routines for server side remote procedure call errors
• svcerr_systemerr(3)
  rpc_svc_err - library routines for server side remote procedure call errors
• svcerr_weakauth(3)
  rpc_svc_err - library routines for server side remote procedure call errors
• svcfd_create(3)
  rpc_soc - library routines for remote procedure calls
• svcraw_create(3)
  rpc_soc - library routines for remote procedure calls
• svctcp_create(3)
  rpc_soc - library routines for remote procedure calls
• svcudp_bufcreate(3)
  rpc_soc - library routines for remote procedure calls
• svcunixfd_create(3)
  rpc_soc - library routines for remote procedure calls
• svcunix_create(3)
  rpc_soc - library routines for remote procedure calls
• svc_auth_reg(3)
  rpc_svc_reg - library routines for registering servers
• svc_control(3)
  rpc_svc_create - library routines for the creation of server handles
• svc_create(3)
  rpc_svc_create - library routines for the creation of server handles
• svc_destroy(3)
  rpc_svc_create - library routines for the creation of server handles
• svc_dg_create(3)
  rpc_svc_create - library routines for the creation of server handles
• svc_dg_enablecache(3)
  svc_dg_enablecache - library routines for RPC servers
• svc_exit(3)
  svc_dg_enablecache - library routines for RPC servers
• svc_fds(3)
  rpc_soc - library routines for remote procedure calls
• svc_fdset(3)
  rpc_soc - library routines for remote procedure calls
• svc_fd_create(3)
  rpc_svc_create - library routines for the creation of server handles
• svc_freeargs(3)
  svc_dg_enablecache - library routines for RPC servers
• svc_getargs(3)
  svc_dg_enablecache - library routines for RPC servers
• svc_getcaller(3)
  rpc_soc - library routines for remote procedure calls
• svc_getreqset(3)
  svc_dg_enablecache - library routines for RPC servers
• svc_getreq_common(3)
  svc_dg_enablecache - library routines for RPC servers
• svc_getreq_poll(3)
  svc_dg_enablecache - library routines for RPC servers
• svc_getrpccaller(3)
  svc_dg_enablecache - library routines for RPC servers
• svc_pollset(3)
  svc_dg_enablecache - library routines for RPC servers
• svc_raw_create(3)
  rpc_svc_create - library routines for the creation of server handles
• svc_reg(3)
  rpc_svc_reg - library routines for registering servers
• svc_register(3)
  rpc_soc - library routines for remote procedure calls
• svc_run(3)
  svc_dg_enablecache - library routines for RPC servers
• svc_sendreply(3)
  svc_dg_enablecache - library routines for RPC servers
• svc_tli_create(3)
  rpc_svc_create - library routines for the creation of server handles
• svc_tp_create(3)
  rpc_svc_create - library routines for the creation of server handles
• svc_unreg(3)
  rpc_svc_reg - library routines for registering servers
• svc_unregister(3)
  rpc_soc - library routines for remote procedure calls
• svc_vc_create(3)
  rpc_svc_create - library routines for the creation of server handles
• svn(1)
  svn - Subversion command line client tool
• svnadmin(1)
  svnadmin - Subversion repository administration tool
• svndumpfilter(1)
  svndumpfilter - Filter a subversion repository "dumpfile".
• svnlook(1)
  svnlook - Subversion repository examination tool
• svnrdump(1)
  svnrdump - Subversion remote repository dumper and loader
• svnserve.conf(5)
  svnserve.conf - Repository configuration file for svnserve
• svnserve(8)
  svnserve - Server for the "svn" repository access method
• svnsync(1)
  svnsync - Subversion repository synchronization tool
• svnversion(1)
  svnversion - Produce a compact version number for a working copy.
• swab(3)
  swab - swap adjacent bytes
• swapcontext(3)
  makecontext - modify and exchange user thread contexts
• swapctl(8)
  swapon - specify devices for paging and swapping
• swapinfo(8)
  pstat - display system data structures
• swapoff(2)
  swapon - control devices for interleaved paging/swapping
• swapon(2)
  swapon - control devices for interleaved paging/swapping
• swapoff(8)
  swapon - specify devices for paging and swapping
• swapon(8)
  swapon - specify devices for paging and swapping
• swi(9)
  swi_add - register and schedule software interrupt handlers
• switch(1)
  builtin - shell built-in commands
• swi_add(9)
  swi_add - register and schedule software interrupt handlers
• swi_sched(9)
  swi_add - register and schedule software interrupt handlers
• swprintf(3)
  wprintf - formatted wide character output conversion
• swscanf(3)
  wscanf - wide character input format conversion
• SW_WATCHDOG(4)
  watchdog - hardware and software watchdog
• sx(9)
  sx - kernel shared/exclusive lock
• sxpm(1)
  sxpm - Show an XPM (X PixMap) file and/or convert XPM 1 or 2 files to XPM 3.
• sx_assert(9)
  sx - kernel shared/exclusive lock
• sx_destroy(9)
  sx - kernel shared/exclusive lock
• sx_downgrade(9)
  sx - kernel shared/exclusive lock
• sx_init(9)
  sx - kernel shared/exclusive lock
• sx_init_flags(9)
  sx - kernel shared/exclusive lock
• sx_sleep(9)
  sx - kernel shared/exclusive lock
• sx_slock(9)
  sx - kernel shared/exclusive lock
• sx_sunlock(9)
  sx - kernel shared/exclusive lock
• SX_SYSINIT(9)
  sx - kernel shared/exclusive lock
• sx_try_slock(9)
  sx - kernel shared/exclusive lock
• sx_try_upgrade(9)
  sx - kernel shared/exclusive lock
• sx_try_xlock(9)
  sx - kernel shared/exclusive lock
• sx_unlock(9)
  sx - kernel shared/exclusive lock
• sx_xholder(9)
  sx - kernel shared/exclusive lock
• sx_xlock(9)
  sx - kernel shared/exclusive lock
• sx_xlocked(9)
  sx - kernel shared/exclusive lock
• sx_xunlock(9)
  sx - kernel shared/exclusive lock
• sym(4)
  sym - NCR/Symbios/LSI Logic 53C8XX PCI SCSI host adapter driver
• symcryptrun(1)
  symcryptrun - Call a simple symmetric encryption tool
• symlink(2)
  symlink - make symbolic link to a file
• symlinkat(2)
  symlink - make symbolic link to a file
• symlink(7)
  symlink - symbolic link handling
• sync(2)
  sync - schedule file system updates
• sync(8)
  sync - force completion of pending disk writes (flush cache)
• syncache(4)
  syncache - sysctl(8)
• syncer(4)
  syncer - file system synchronizer kernel process
• syncok(3)
  newwin, delwin, mvwin, subwin, derwin, mvderwin, dupwin, wsyncup, syncok, wcursyncup, wsyncdown - create curses windows
• syncookies(4)
  syncache - sysctl(8)
• sysarch(2)
  sysarch - architecture-dependent system call
• syscall(2)
  syscall - indirect system call
• SYSCALL_MODULE(9)
  SYSCALL_MODULE - syscall kernel module declaration macro
• sysconf(3)
  sysconf - get configurable system variables
• syscons(4)
  syscons - the console driver
• sysctl(3)
  sysctl - get or set system information
• sysctlbyname(3)
  sysctl - get or set system information
• sysctlnametomib(3)
  sysctl - get or set system information
• sysctl.conf(5)
  sysctl.conf - kernel state defaults
• sysctl(8)
  sysctl - get or set kernel state
• sysctl(9)
  SYSCTL_DECL - Static sysctl declaration functions
• SYSCTL_ADD_INT(9)
  sysctl_add_oid - runtime sysctl tree manipulation
• SYSCTL_ADD_LONG(9)
  sysctl_add_oid - runtime sysctl tree manipulation
• SYSCTL_ADD_NODE(9)
  sysctl_add_oid - runtime sysctl tree manipulation
• SYSCTL_ADD_OID(9)
  sysctl_add_oid - runtime sysctl tree manipulation
• SYSCTL_ADD_OPAQUE(9)
  sysctl_add_oid - runtime sysctl tree manipulation
• SYSCTL_ADD_PROC(9)
  sysctl_add_oid - runtime sysctl tree manipulation
• SYSCTL_ADD_QUAD(9)
  sysctl_add_oid - runtime sysctl tree manipulation
• SYSCTL_ADD_STRING(9)
  sysctl_add_oid - runtime sysctl tree manipulation
• SYSCTL_ADD_STRUCT(9)
  sysctl_add_oid - runtime sysctl tree manipulation
• SYSCTL_ADD_UINT(9)
  sysctl_add_oid - runtime sysctl tree manipulation
• SYSCTL_ADD_ULONG(9)
  sysctl_add_oid - runtime sysctl tree manipulation
• SYSCTL_CHILDREN(9)
  sysctl_add_oid - runtime sysctl tree manipulation
• sysctl_ctx_entry_add(9)
  sysctl_ctx_init - sysctl context for managing dynamically created sysctl oids
• sysctl_ctx_entry_del(9)
  sysctl_ctx_init - sysctl context for managing dynamically created sysctl oids
• sysctl_ctx_entry_find(9)
  sysctl_ctx_init - sysctl context for managing dynamically created sysctl oids
• sysctl_ctx_free(9)
  sysctl_ctx_init - sysctl context for managing dynamically created sysctl oids
• sysctl_ctx_init(9)
  sysctl_ctx_init - sysctl context for managing dynamically created sysctl oids
• SYSCTL_DECL(9)
  SYSCTL_DECL - Static sysctl declaration functions
• SYSCTL_INT(9)
  SYSCTL_DECL - Static sysctl declaration functions
• SYSCTL_LONG(9)
  SYSCTL_DECL - Static sysctl declaration functions
• sysctl_move_oid(9)
  sysctl_add_oid - runtime sysctl tree manipulation
• SYSCTL_NODE(9)
  SYSCTL_DECL - Static sysctl declaration functions
• SYSCTL_OPAQUE(9)
  SYSCTL_DECL - Static sysctl declaration functions
• SYSCTL_PROC(9)
  SYSCTL_DECL - Static sysctl declaration functions
• SYSCTL_QUAD(9)
  SYSCTL_DECL - Static sysctl declaration functions
• sysctl_remove_oid(9)
  sysctl_add_oid - runtime sysctl tree manipulation
• SYSCTL_STATIC_CHILDREN(9)
  sysctl_add_oid - runtime sysctl tree manipulation
• SYSCTL_STRING(9)
  SYSCTL_DECL - Static sysctl declaration functions
• SYSCTL_STRUCT(9)
  SYSCTL_DECL - Static sysctl declaration functions
• SYSCTL_UINT(9)
  SYSCTL_DECL - Static sysctl declaration functions
• SYSCTL_ULONG(9)
  SYSCTL_DECL - Static sysctl declaration functions
• sysexits(3)
  sysexits - preferable exit codes for programs
• sysinstall(8)
  sysinstall - system installation and configuration tool
• SYSINIT(9)
  SYSINIT - a framework for dynamic kernel initialization
• syslog(3)
  syslog - control system log
• syslog.conf(5)
  syslog.conf - syslogd(8)
• syslogd(8)
  syslogd - log systems messages
• sysmouse(4)
  sysmouse - virtualized mouse driver
• systat(1)
  systat - display system statistics
• system(3)
  system - pass a command to the shell
• SYSUNINIT(9)
  SYSINIT - a framework for dynamic kernel initialization
• sys_errlist(3)
  perror - system error messages
• sys_nerr(3)
  perror - system error messages
• sys_siglist(3)
  psignal - system signal messages
• sys_signame(3)
  psignal - system signal messages