i| Manual Pages for FreeBSD

Manual pages for FreeBSD (i):

• i2c(8)
  i2c - test I2C bus and slave devices
• i8254(4)
  attimer - i8254 Programmable Interval Timer (AT Timer) driver
• iasl(8)
  iasl - Intel ACPI compiler/decompiler
• ibclr(3)
  ibclr - GPIB library
• ibdev(3)
  ibclr - GPIB library
• ibdma(3)
  ibclr - GPIB library
• ibeos(3)
  ibclr - GPIB library
• ibeot(3)
  ibclr - GPIB library
• ibloc(3)
  ibclr - GPIB library
• ibonl(3)
  ibclr - GPIB library
• ibpad(3)
  ibclr - GPIB library
• ibrd(3)
  ibclr - GPIB library
• ibsad(3)
  ibclr - GPIB library
• ibsic(3)
  ibclr - GPIB library
• ibtmo(3)
  ibclr - GPIB library
• ibtrg(3)
  ibclr - GPIB library
• ibwrt(3)
  ibclr - GPIB library
• ichsmb(4)
  ichsmb - Intel ICH SMBus controller driver
• ichwd(4)
  ichwd - device driver for the Intel ICH watchdog interrupt timer
• icmp(4)
  icmp - Internet Control Message Protocol
• icmp6(4)
  icmp6 - Internet Control Message Protocol for IPv6
• iconv(1)
  iconv - character set conversion
• iconv(3)
  iconv - perform character set conversion
• iconvctl(3)
  iconvctl - control iconv behavior
• iconv_close(3)
  iconv_close - deallocate descriptor for character set conversion
• iconv_open(3)
  iconv_open - allocate descriptor for character set conversion
• iconv_open_into(3)
  iconv_open_into - initialize descriptor for character set conversion
• icu-config(1)
  icu - config - output ICU build options
• icupkg(8)
  icupkg - extract or modify an ICU .dat archive
• id(1)
  id - return user identity
• ida(4)
  ida - Compaq Intelligent Drive Array Controllers
• idcok(3)
  clearok, idlok, idcok, immedok, leaveok, setscrreg, wsetscrreg, scrollok, nl, nonl - curses output options
• ident(1)
  ident - identify RCS keyword strings in files
• identify(1)
  identify - describes the format and characteristics of one or more image files.
• idlok(3)
  clearok, idlok, idcok, immedok, leaveok, setscrreg, wsetscrreg, scrollok, nl, nonl - curses output options
• idprio(1)
  rtprio - execute, examine or modify a utility"s or process"s realtime or idletime scheduling priority
• idt(4)
  idt - device driver for IDT NICStAR-based ATM interfaces
• ieee(3)
  ieee - IEEE standard 754 for floating-point arithmetic
• ieee1394(4)
  firewire - IEEE1394 High-performance Serial Bus
• ieee80211(9)
  IEEE80211 - 802.11 network layer
• ieee80211_alloc_countryie(9)
  ieee80211_regdomain - 802.11 regulatory support
• ieee80211_amrr(9)
  ieee80211_amrr - 802.11 network driver transmit rate control support
• ieee80211_amrr_cleanup(9)
  ieee80211_amrr - 802.11 network driver transmit rate control support
• ieee80211_amrr_init(9)
  ieee80211_amrr - 802.11 network driver transmit rate control support
• ieee80211_amrr_node_init(9)
  ieee80211_amrr - 802.11 network driver transmit rate control support
• ieee80211_amrr_setinterval(9)
  ieee80211_amrr - 802.11 network driver transmit rate control support
• ieee80211_amrr_tx_complete(9)
  ieee80211_amrr - 802.11 network driver transmit rate control support
• ieee80211_amrr_tx_update(9)
  ieee80211_amrr - 802.11 network driver transmit rate control support
• ieee80211_beacon(9)
  ieee80211_beacon - 802.11 beacon support
• ieee80211_beacon_alloc(9)
  ieee80211_beacon - 802.11 beacon support
• ieee80211_beacon_miss(9)
  ieee80211_bmiss - 802.11 beacon miss support
• ieee80211_beacon_notify(9)
  ieee80211_beacon - 802.11 beacon support
• ieee80211_beacon_update(9)
  ieee80211_beacon - 802.11 beacon support
• ieee80211_bmiss(9)
  ieee80211_bmiss - 802.11 beacon miss support
• ieee80211_crypto(9)
  ieee80211_crypto - 802.11 cryptographic support
• ieee80211_crypto_available(9)
  ieee80211_crypto - 802.11 cryptographic support
• ieee80211_crypto_decap(9)
  ieee80211_crypto - 802.11 cryptographic support
• ieee80211_crypto_delglobalkeys(9)
  ieee80211_crypto - 802.11 cryptographic support
• ieee80211_crypto_demic(9)
  ieee80211_crypto - 802.11 cryptographic support
• ieee80211_crypto_encap(9)
  ieee80211_crypto - 802.11 cryptographic support
• ieee80211_crypto_enmic(9)
  ieee80211_crypto - 802.11 cryptographic support
• ieee80211_crypto_newkey(9)
  ieee80211_crypto - 802.11 cryptographic support
• ieee80211_crypto_register(9)
  ieee80211_crypto - 802.11 cryptographic support
• ieee80211_crypto_reload_keys(9)
  ieee80211_crypto - 802.11 cryptographic support
• ieee80211_crypto_setkey(9)
  ieee80211_crypto - 802.11 cryptographic support
• ieee80211_crypto_unregister(9)
  ieee80211_crypto - 802.11 cryptographic support
• ieee80211_ddb(9)
  ieee80211_ddb - 802.11 ddb support
• ieee80211_dump_node(9)
  ieee80211_node - software 802.11 stack node management functions
• ieee80211_dump_nodes(9)
  ieee80211_node - software 802.11 stack node management functions
• ieee80211_find_rxnode(9)
  ieee80211_node - software 802.11 stack node management functions
• ieee80211_find_rxnode_withkey(9)
  ieee80211_node - software 802.11 stack node management functions
• ieee80211_free_node(9)
  ieee80211_node - software 802.11 stack node management functions
• ieee80211_ifattach(9)
  IEEE80211 - 802.11 network layer
• ieee80211_ifdetach(9)
  IEEE80211 - 802.11 network layer
• ieee80211_init_channels(9)
  ieee80211_regdomain - 802.11 regulatory support
• ieee80211_input(9)
  ieee80211_input - software 802.11 stack input functions
• ieee80211_input_all(9)
  ieee80211_input - software 802.11 stack input functions
• ieee80211_iterate_nodes(9)
  ieee80211_node - software 802.11 stack node management functions
• ieee80211_key_update_begin(9)
  ieee80211_crypto - 802.11 cryptographic support
• ieee80211_key_update_end(9)
  ieee80211_crypto - 802.11 cryptographic support
• ieee80211_new_state(9)
  ieee80211_proto - 802.11 state machine support
• ieee80211_node(9)
  ieee80211_node - software 802.11 stack node management functions
• ieee80211_notify_michael_failure(9)
  ieee80211_crypto - 802.11 cryptographic support
• ieee80211_notify_replay_failure(9)
  ieee80211_crypto - 802.11 cryptographic support
• ieee80211_output(9)
  ieee80211_output - software 802.11 stack output functions
• ieee80211_process_callback(9)
  ieee80211_output - software 802.11 stack output functions
• ieee80211_proto(9)
  ieee80211_proto - 802.11 state machine support
• ieee80211_radiotap(9)
  ieee80211_radiotap - 802.11 device packet capture support
• ieee80211_radiotap_active(9)
  ieee80211_radiotap - 802.11 device packet capture support
• ieee80211_radiotap_active_vap(9)
  ieee80211_radiotap - 802.11 device packet capture support
• ieee80211_radiotap_attach(9)
  ieee80211_radiotap - 802.11 device packet capture support
• ieee80211_radiotap_tx(9)
  ieee80211_radiotap - 802.11 device packet capture support
• ieee80211_ref_node(9)
  ieee80211_node - software 802.11 stack node management functions
• ieee80211_regdomain(9)
  ieee80211_regdomain - 802.11 regulatory support
• ieee80211_resume_all(9)
  ieee80211_proto - 802.11 state machine support
• ieee80211_scan(9)
  ieee80211_scan - 802.11 scanning support
• ieee80211_sort_channels(9)
  ieee80211_regdomain - 802.11 regulatory support
• ieee80211_start_all(9)
  ieee80211_proto - 802.11 state machine support
• ieee80211_stop_all(9)
  ieee80211_proto - 802.11 state machine support
• ieee80211_suspend_all(9)
  ieee80211_proto - 802.11 state machine support
• ieee80211_unref_node(9)
  ieee80211_node - software 802.11 stack node management functions
• ieee80211_vap(9)
  net80211_vap - 802.11 network layer virtual radio support
• ieee80211_vap_attach(9)
  net80211_vap - 802.11 network layer virtual radio support
• ieee80211_vap_detach(9)
  net80211_vap - 802.11 network layer virtual radio support
• ieee80211_vap_setup(9)
  net80211_vap - 802.11 network layer virtual radio support
• ieee80211_waitfor_parent(9)
  ieee80211_proto - 802.11 state machine support
• ieee_test(3)
  scalb - IEEE test functions
• if(1)
  builtin - shell built-in commands
• ifaddr(9)
  ifnet - kernel interfaces for manipulating network interfaces
• ifconfig(8)
  ifconfig - configure network interface parameters
• ifmcstat(8)
  ifmcstat - dump multicast group management statistics per interface
• ifmib(4)
  ifmib - Management Information Base for network interfaces
• ifnames-2.68(1)
  ifnames - 2.68 - Extract CPP conditionals from a set of files
• ifnet(9)
  ifnet - kernel interfaces for manipulating network interfaces
• ifqueue(9)
  ifnet - kernel interfaces for manipulating network interfaces
• if_ae(4)
  ae - Attansic/Atheros L2 FastEthernet controller driver
• if_age(4)
  age - Attansic/Atheros L1 Gigabit Ethernet driver
• if_ale(4)
  ale - Atheros AR8121/AR8113/AR8114 Gigabit/Fast Ethernet driver
• if_an(4)
  an - Aironet Communications 4500/4800 wireless network adapter driver
• if_aue(4)
  aue - ADMtek AN986 Pegasus USB Ethernet driver
• if_axe(4)
  axe - ASIX Electronics AX88x7x/760 USB Ethernet driver
• if_bce(4)
  bce - Broadcom NetXtreme II (BCM5706/5708/5709/5716) PCI/PCIe Gigabit Ethernet adapter driver
• if_bfe(4)
  bfe - Broadcom BCM4401 Ethernet Device Driver
• if_bge(4)
  bge - Broadcom BCM57xx/BCM590x Gigabit/Fast Ethernet driver
• if_bridge(4)
  if_bridge - network bridge device
• if_bwi(4)
  bwi - Broadcom BCM43xx IEEE 802.11b/g wireless network driver
• if_cas(4)
  cas - Sun Cassini/Cassini+ and National Semiconductor DP83065 Saturn Gigabit Ethernet driver
• if_cue(4)
  cue - CATC USB-EL1210A USB Ethernet driver
• if_data(9)
  ifnet - kernel interfaces for manipulating network interfaces
• if_dc(4)
  dc - DEC/Intel 21143 and clone 10/100 Ethernet driver
• if_de(4)
  de - DEC DC21x4x Ethernet device driver
• if_disc(4)
  disc - software discard network interface
• if_ed(4)
  ed - NE-2000 and WD-80x3 Ethernet driver
• if_edsc(4)
  edsc - Ethernet discard network interface
• if_ef(4)
  ef - pseudo-device driver providing support for multiple Ethernet frame types
• if_em(4)
  em - Intel(R) PRO/1000 Gigabit Ethernet adapter driver
• if_en(4)
  en - device driver for Midway-based ATM interfaces
• if_enc(4)
  enc - Encapsulating Interface
• if_epair(4)
  epair - A pair of virtual back-to-back connected Ethernet interfaces.
• if_et(4)
  et - Agere ET1310 10/100/Gigabit Ethernet driver
• if_faith(4)
  faith - IPv6-to-IPv4 TCP relay capturing interface
• if_fatm(4)
  fatm - device driver for Fore PCA200E ATM interfaces
• if_freenameindex(3)
  if_nametoindex - provide mappings between interface names and indexes
• if_fwe(4)
  fwe - Ethernet emulation driver for FireWire
• if_fwip(4)
  fwip - IP over FireWire driver
• if_fxp(4)
  fxp - Intel EtherExpress PRO/100 Ethernet device driver
• if_gem(4)
  gem - ERI/GEM/GMAC Ethernet device driver
• if_gif(4)
  gif - generic tunnel interface
• if_gre(4)
  gre - encapsulating network device
• if_hatm(4)
  hatm - device driver for Fore/Marconi HE155 and HE622 ATM interfaces
• if_hme(4)
  hme - Sun Microelectronics STP2002-STQ Ethernet interfaces device driver
• if_idt(4)
  idt - device driver for IDT NICStAR-based ATM interfaces
• if_igb(4)
  igb - Intel(R) PRO/1000 PCI Express Gigabit Ethernet adapter driver
• if_indextoname(3)
  if_nametoindex - provide mappings between interface names and indexes
• if_ipw(4)
  ipw - Intel PRO/Wireless 2100 IEEE 802.11 driver
• if_iwi(4)
  iwi - Intel PRO/Wireless 2200BG/2225BG/2915ABG IEEE 802.11 driver
• if_iwn(4)
  iwn - Intel Wireless WiFi Link 4965/1000/5000/5150/5300/6000/6050 IEEE 802.11n driver
• if_ixgb(4)
  ixgb - Intel(R) PRO/10GbE Ethernet driver for the FreeBSD operating system
• if_ixgbe(4)
  ixgbe - Intel(R) 10Gb Ethernet driver for the FreeBSD operating system
• if_jme(4)
  jme - JMicron Gigabit/Fast Ethernet driver
• if_kue(4)
  kue - Kawasaki LSI KL5KUSB101B USB Ethernet driver
• if_le(4)
  le - AMD Am7900 LANCE and Am79C9xx ILACC/PCnet Ethernet interface driver
• if_lge(4)
  lge - Level 1 LXT1001 NetCellerator PCI Gigabit Ethernet adapter driver
• if_malo(4)
  malo - Marvell Libertas IEEE 802.11b/g wireless network driver
• if_mn(4)
  mn - Siemens Easy321-R1 E1/T1 device driver
• if_mxge(4)
  mxge - Myricom Myri10GE 10 Gigabit Ethernet adapter driver
• if_my(4)
  my - Myson Technology Ethernet PCI driver
• if_nameindex(3)
  if_nametoindex - provide mappings between interface names and indexes
• if_nametoindex(3)
  if_nametoindex - provide mappings between interface names and indexes
• if_ndis(4)
  ndis - NDIS miniport driver wrapper
• if_nfe(4)
  nfe - NVIDIA nForce MCP Ethernet driver
• if_nge(4)
  nge - National Semiconductor PCI Gigabit Ethernet adapter driver
• if_nve(4)
  nve - NVIDIA nForce MCP Networking Adapter device driver
• if_nxge(4)
  nxge - Neterion Xframe 10GbE Server/Storage adapter driver
• if_patm(4)
  patm - device driver for IDT77252 based ATM interfaces (ProSum and IDT)
• if_pcn(4)
  pcn - AMD PCnet/PCI Fast Ethernet device driver
• if_ral(4)
  ral - Ralink Technology IEEE 802.11 wireless network driver
• if_re(4)
  re - RealTek 8139C+/8169/816xS/811xS/8168/810xE/8111 PCI/PCIe Ethernet adapter driver
• if_rl(4)
  rl - RealTek 8129/8139 Fast Ethernet device driver
• if_rue(4)
  rue - RealTek RTL8150 USB to Fast Ethernet controller driver
• if_rum(4)
  rum - Ralink Technology USB IEEE 802.11a/b/g wireless network device
• if_sf(4)
  sf - Adaptec AIC-6915 "Starfire" PCI Fast Ethernet adapter driver
• if_sis(4)
  sis - SiS 900, SiS 7016 and NS DP83815/DP83816 Fast Ethernet device driver
• if_sk(4)
  sk - SysKonnect SK-984x and SK-982x PCI Gigabit Ethernet adapter driver
• if_sn(4)
  sn - Ethernet driver for SMC91Cxx based cards
• if_ste(4)
  ste - Sundance Technologies ST201 Fast Ethernet device driver
• if_stf(4)
  stf - 6to4 tunnel interface
• if_stge(4)
  stge - Sundance/Tamarack TC9021 Gigabit Ethernet adapter driver
• if_tap(4)
  tap - Ethernet tunnel software network interface
• if_ti(4)
  ti - Alteon Networks Tigon I and Tigon II Gigabit Ethernet driver
• if_tl(4)
  tl - Texas Instruments ThunderLAN Ethernet device driver
• if_tun(4)
  tun - tunnel software network interface
• if_tx(4)
  tx - SMC 83c17x Fast Ethernet device driver
• if_txp(4)
  txp - 3Com 3XP Typhoon/Sidewinder (3CR990) Ethernet interface
• if_uath(4)
  uath - Atheros USB IEEE 802.11a/b/g wireless network device
• if_udav(4)
  udav - Davicom DM9601 USB Ethernet driver
• if_upgt(4)
  upgt - Conexant/Intersil PrismGT SoftMAC USB IEEE 802.11b/g wireless network device
• if_ural(4)
  ural - Ralink Technology RT2500USB IEEE 802.11 driver
• if_urtw(4)
  urtw - Realtek RTL8187B/L USB IEEE 802.11b/g wireless network device
• if_vge(4)
  vge - VIA Networking Technologies Velocity Gigabit Ethernet adapter driver
• if_vlan(4)
  vlan - IEEE 802.1Q VLAN network interface
• if_vr(4)
  vr - VIA Technologies Rhine I/II/III Ethernet device driver
• if_vxge(4)
  vxge - Neterion X3100 10GbE Server/Storage adapter driver
• if_wb(4)
  wb - Winbond W89C840F Fast Ethernet device driver
• if_wi(4)
  wi - Lucent Hermes, and Intersil PRISM IEEE 802.11 driver
• if_wpi(4)
  wpi - Intel 3945ABG Wireless LAN IEEE 802.11 driver
• if_xe(4)
  xe - Xircom PCMCIA Ethernet device driver
• if_xl(4)
  xl - 3Com Etherlink XL and Fast Etherlink XL Ethernet device driver
• if_zyd(4)
  zyd - ZyDAS ZD1211/ZD1211B USB IEEE 802.11b/g wireless network device
• igb(4)
  igb - Intel(R) PRO/1000 PCI Express Gigabit Ethernet adapter driver
• igmp(4)
  igmp - Internet Group Management Protocol
• iic(4)
  iic - I2C generic I/O device driver
• iicbb(4)
  iicbb - I2C generic bit-banging driver
• iicbus(4)
  iicbus - I2C bus system
• iicsmb(4)
  iicsmb - I2C to SMB bridge
• iir(4)
  iir - Intel Integrated RAID controller and ICP Vortex driver
• ilogb(3)
  ilogb - extract exponent
• ilogbf(3)
  ilogb - extract exponent
• ilogbl(3)
  ilogb - extract exponent
• ImageMagick(1)
  ImageMagick - is a free software suite for the creation, modification and display of bitmap images.
• ImageByteOrder(3)
  ImageByteOrder, BitmapBitOrder, BitmapPad, BitmapUnit, DisplayHeight, DisplayHeightMM, DisplayWidth, DisplayWidthMM, XListPixmapFormats, XPixmapFormatValues - image format functions and macros
• imaxabs(3)
  imaxabs - returns absolute value
• imaxdiv(3)
  imaxdiv - returns quotient and remainder
• imgcmp(1)
  imgcmp - Image comparison utility
• imginfo(1)
  imginfo - Image information utility
• imm(4)
  vpo - parallel to SCSI interface driver
• immedok(3)
  clearok, idlok, idcok, immedok, leaveok, setscrreg, wsetscrreg, scrollok, nl, nonl - curses output options
• import(1)
  import - saves any visible window on an X server and outputs it as an image file. You can capture a single window, the entire screen, or any rectangular portion of the screen.
• inch(3)
  inch, winch, mvinch, mvwinch - get a character and attributes from a curses window
• inchnstr(3)
  inchstr, inchnstr, winchstr, winchnstr, mvinchstr, mvinchnstr, mvwinchstr, mvwinchnstr - get a string of characters (and attributes) from a curses window
• inchstr(3)
  inchstr, inchnstr, winchstr, winchnstr, mvinchstr, mvinchnstr, mvwinchstr, mvwinchnstr - get a string of characters (and attributes) from a curses window
• indent(1)
  indent - indent and format C program source
• index(3)
  index - locate character in string
• indxbib(1)
  indxbib - make inverted index for bibliographic databases
• inet(3)
  inet_aton - Internet address manipulation routines
• inet(4)
  inet - Internet protocol family
• inet6_option_alloc(3)
  inet6_option_space - IPv6 Hop-by-Hop and Destination Option Manipulation
• inet6_option_append(3)
  inet6_option_space - IPv6 Hop-by-Hop and Destination Option Manipulation
• inet6_option_find(3)
  inet6_option_space - IPv6 Hop-by-Hop and Destination Option Manipulation
• inet6_option_init(3)
  inet6_option_space - IPv6 Hop-by-Hop and Destination Option Manipulation
• inet6_option_next(3)
  inet6_option_space - IPv6 Hop-by-Hop and Destination Option Manipulation
• inet6_option_space(3)
  inet6_option_space - IPv6 Hop-by-Hop and Destination Option Manipulation
• inet6_opt_append(3)
  inet6_opt_init - IPv6 Hop-by-Hop and Destination Options manipulation
• inet6_opt_find(3)
  inet6_opt_init - IPv6 Hop-by-Hop and Destination Options manipulation
• inet6_opt_finish(3)
  inet6_opt_init - IPv6 Hop-by-Hop and Destination Options manipulation
• inet6_opt_get_val(3)
  inet6_opt_init - IPv6 Hop-by-Hop and Destination Options manipulation
• inet6_opt_init(3)
  inet6_opt_init - IPv6 Hop-by-Hop and Destination Options manipulation
• inet6_opt_next(3)
  inet6_opt_init - IPv6 Hop-by-Hop and Destination Options manipulation
• inet6_opt_set_val(3)
  inet6_opt_init - IPv6 Hop-by-Hop and Destination Options manipulation
• inet6_rthdr_add(3)
  inet6_rthdr_space - IPv6 Routing Header Options Manipulation
• inet6_rthdr_getaddr(3)
  inet6_rthdr_space - IPv6 Routing Header Options Manipulation
• inet6_rthdr_getflags(3)
  inet6_rthdr_space - IPv6 Routing Header Options Manipulation
• inet6_rthdr_init(3)
  inet6_rthdr_space - IPv6 Routing Header Options Manipulation
• inet6_rthdr_lasthop(3)
  inet6_rthdr_space - IPv6 Routing Header Options Manipulation
• inet6_rthdr_reverse(3)
  inet6_rthdr_space - IPv6 Routing Header Options Manipulation
• inet6_rthdr_segments(3)
  inet6_rthdr_space - IPv6 Routing Header Options Manipulation
• inet6_rthdr_space(3)
  inet6_rthdr_space - IPv6 Routing Header Options Manipulation
• inet6_rth_add(3)
  inet6_rth_space - IPv6 Routing Header Options manipulation
• inet6_rth_getaddr(3)
  inet6_rth_space - IPv6 Routing Header Options manipulation
• inet6_rth_init(3)
  inet6_rth_space - IPv6 Routing Header Options manipulation
• inet6_rth_reverse(3)
  inet6_rth_space - IPv6 Routing Header Options manipulation
• inet6_rth_segments(3)
  inet6_rth_space - IPv6 Routing Header Options manipulation
• inet6_rth_space(3)
  inet6_rth_space - IPv6 Routing Header Options manipulation
• inet6(4)
  inet6 - Internet protocol version 6 family
• inetd.conf(5)
  inetd - internet "super-server"
• inetd(8)
  inetd - internet "super-server"
• inet_addr(3)
  inet_aton - Internet address manipulation routines
• inet_aton(3)
  inet_aton - Internet address manipulation routines
• inet_lnaof(3)
  inet_aton - Internet address manipulation routines
• inet_makeaddr(3)
  inet_aton - Internet address manipulation routines
• inet_net(3)
  inet_net_ntop - Internet network number manipulation routines
• inet_netof(3)
  inet_aton - Internet address manipulation routines
• inet_network(3)
  inet_aton - Internet address manipulation routines
• inet_net_ntop(3)
  inet_net_ntop - Internet network number manipulation routines
• inet_net_pton(3)
  inet_net_ntop - Internet network number manipulation routines
• inet_ntoa(3)
  inet_aton - Internet address manipulation routines
• inet_ntoa_r(3)
  inet_aton - Internet address manipulation routines
• inet_ntop(3)
  inet_aton - Internet address manipulation routines
• inet_pton(3)
  inet_aton - Internet address manipulation routines
• info(1)
  info - read Info documents
• info(5)
  info - readable online documentation
• infokey(1)
  infokey - compile customizations for Info
• init(8)
  init - process control initialization
• initgroups(3)
  initgroups - initialize group access list
• initscr(3)
  initscr, newterm, endwin, isendwin, set_term, delscreen - curses screen initialization and manipulation routines
• initstate(3)
  random - better random number generator; routines for changing generators
• inittodr(9)
  inittodr - initialize system time
• init_color(3)
  start_color, init_pair, init_color, has_colors, can_change_color, color_content, pair_content, COLOR_PAIR - curses color manipulation routines
• init_pair(3)
  start_color, init_pair, init_color, has_colors, can_change_color, color_content, pair_content, COLOR_PAIR - curses color manipulation routines
• init_sleepqueues(9)
  init_sleepqueues - manage the queues of sleeping threads
• innetgr(3)
  getnetgrent - netgroup database operations
• innstr(3)
  instr, innstr, winstr, winnstr, mvinstr, mvinnstr, mvwinstr, mvwinnstr - get a string of characters from a curses window
• innwstr(3)
  inwstr, innwstr, winwstr, winnwstr, mvinwstr, mvinnwstr, mvwinwstr, mvwinnwstr - get a string of wchar_t characters from a curses window
• inode(5)
  fs - format of file system volume
• insch(3)
  insch, winsch, mvinsch, mvwinsch - insert a character before cursor in a curses window
• insdelln(3)
  deleteln, wdeleteln, insdelln, winsdelln, insertln, winsertln - delete and insert lines in a curses window
• insertln(3)
  deleteln, wdeleteln, insdelln, winsdelln, insertln, winsertln - delete and insert lines in a curses window
• insmntque(9)
  insmntque - associate a vnode with a mount
• insmntque1(9)
  insmntque - associate a vnode with a mount
• insnstr(3)
  insstr, insnstr, winsstr, winsnstr, mvinsstr, mvinsnstr, mvwinsstr, mvwinsnstr - insert string before cursor in a curses window
• insque(3)
  insque - doubly-linked list management
• insstr(3)
  insstr, insnstr, winsstr, winsnstr, mvinsstr, mvinsnstr, mvwinsstr, mvwinsnstr - insert string before cursor in a curses window
• install-info(1)
  install - info - update info/dir entries
• install(1)
  install - install binaries
• instmodsh(1)
  instmodsh - A shell to examine installed modules
• instr(3)
  instr, innstr, winstr, winnstr, mvinstr, mvinnstr, mvwinstr, mvwinnstr - get a string of characters from a curses window
• ins_nwstr(3)
  ins_wstr, ins_nwstr, wins_wstr, wins_nwstr, mvins_wstr, mvins_nwstr, mvwins_wstr, mvwins_nwstr - insert a wide-character string into a curses window
• ins_wch(3)
  ins_wch, mvins_wch, mvwins_wch, wins_wch - insert a complex character and rendition into a window
• ins_wstr(3)
  ins_wstr, ins_nwstr, wins_wstr, wins_nwstr, mvins_wstr, mvins_nwstr, mvwins_wstr, mvwins_nwstr - insert a wide-character string into a curses window
• intpm(4)
  intpm - Intel PIIX4 Power Management controller driver
• intrflush(3)
  cbreak, nocbreak, echo, noecho, halfdelay, intrflush, keypad, meta, nodelay, notimeout, raw, noraw, noqiflush, qiflush, timeout, wtimeout, typeahead - curses input options
• intro(1)
  intro - introduction to general commands (tools and utilities)
• introduction(1)
  intro - introduction to general commands (tools and utilities)
• intro(2)
  intro - introduction to system calls and error numbers
• intro(3)
  intro - introduction to the C libraries
• intro(4)
  intro - introduction to devices and device drivers
• intro(5)
  intro - introduction to file formats
• intro(6)
  intro - introduction to games
• intro(7)
  intro - miscellaneous information pages
• intro(8)
  intro - introduction to system maintenance procedures and commands
• intro(9)
  intro - introduction to system kernel interfaces
• inwstr(3)
  inwstr, innwstr, winwstr, winnwstr, mvinwstr, mvinnwstr, mvwinwstr, mvwinnwstr - get a string of wchar_t characters from a curses window
• in_lt(3)
  parse_lt - functions for parsing and checking login time periods
• in_ltm(3)
  parse_lt - functions for parsing and checking login time periods
• in_ltms(3)
  parse_lt - functions for parsing and checking login time periods
• in_lts(3)
  parse_lt - functions for parsing and checking login time periods
• in_wch(3)
  in_wch, mvin_wch, mvwin_wch, win_wch - extract a complex character and rendition from a window
• in_wchnstr(3)
  in_wchstr, in_wchnstr, win_wchstr, win_wchnstr, mvin_wchstr, mvin_wchnstr, mvwin_wchstr, mvwin_wchnstr - get an array of complex characters and renditions from a curses window
• in_wchstr(3)
  in_wchstr, in_wchnstr, win_wchstr, win_wchnstr, mvin_wchstr, mvin_wchnstr, mvwin_wchstr, mvwin_wchnstr - get an array of complex characters and renditions from a curses window
• io(4)
  io - I/O privilege file
• ioctl(2)
  ioctl - control device
• iostat(8)
  iostat - report I/O statistics
• ip(4)
  ip - Internet Protocol
• ip6(4)
  ip6 - Internet Protocol version 6 (IPv6) network layer
• ip6addrctl(8)
  ip6addrctl - configure address selection policy for IPv6 and IPv4
• ipaccounting(4)
  ipfw - IP packet filter and traffic accounting
• ipacct(4)
  ipfw - IP packet filter and traffic accounting
• ipcrm(1)
  ipcrm - remove the specified message queues, semaphore sets, and shared segments
• ipcs(1)
  ipcs - report System V interprocess communication facilities status
• ipf(4)
  ipf - packet filtering kernel interface
• ipf(5)
  ipf, ipf.conf, ipf6.conf - IP packet filter rule syntax
• ipf(8)
  ipf - alters packet filtering lists for IP packet input and output
• ipf.conf(5)
  ipf, ipf.conf, ipf6.conf - IP packet filter rule syntax
• ipf6.conf(5)
  ipf, ipf.conf, ipf6.conf - IP packet filter rule syntax
• ipfilter(4)
  ipl - IP packet log device
• ipfirewall(4)
  ipfw - IP packet filter and traffic accounting
• ipfs(8)
  ipfs - saves and restores information for NAT and state tables.
• ipfstat(8)
  ipfstat - reports on packet filter statistics and filter list
• ipftest(1)
  ipftest - test packet filter rules with arbitrary input.
• ipfw(4)
  ipfw - IP packet filter and traffic accounting
• ipfw(8)
  ipfw - User interface for firewall, traffic shaper, packet scheduler, in-kernel NAT.
• ipfwpcap(8)
  ipfwpcap - copy diverted packets to a file in tcpdump format
• ipl(4)
  ipl - IP packet log device
• ipmi(4)
  ipmi - OpenIPMI compatible IPMI interface driver
• ipmon(8)
  ipmon - monitors /dev/ipl for logged packets
• ipnat(4)
  ipnat - Network Address Translation kernel interface
• ipnat(5)
  ipnat, ipnat.conf - IP NAT file format
• ipnat.conf(5)
  ipnat, ipnat.conf - IP NAT file format
• ipnat(8)
  ipnat - user interface to the NAT subsystem
• ippool(8)
  ippool - user interface to the IPFilter pools
• ipresend(1)
  ipresend - resend IP packets out to network
• ips(4)
  ips - IBM/Adaptec ServeRAID controller driver
• ipsec_dump_policy(3)
  ipsec_set_policy - create an IPsec policy structure from a human readable string
• ipsec_get_policylen(3)
  ipsec_set_policy - create an IPsec policy structure from a human readable string
• ipsec_set_policy(3)
  ipsec_set_policy - create an IPsec policy structure from a human readable string
• ipsec_strerror(3)
  ipsec_strerror - error messages for the IPsec policy manipulation library
• ipsec(4)
  IPsec - Internet Protocol Security protocol
• ipw(4)
  ipw - Intel PRO/Wireless 2100 IEEE 802.11 driver
• ipwfw(4)
  ipwfw - Firmware Module for Intel PRO/Wireless 2100 driver
• ipx(3)
  ipx_addr - IPX address conversion routines
• IPXrouted(8)
  IPXrouted - IPX Routing Information Protocol daemon
• ipx_addr(3)
  ipx_addr - IPX address conversion routines
• ipx_ntoa(3)
  ipx_addr - IPX address conversion routines
• iruserok(3)
  rcmd - routines for returning a stream to a remote command
• iruserok_sa(3)
  rcmd - routines for returning a stream to a remote command
• isalnum(3)
  isalnum - alphanumeric character test
• isalpha(3)
  isalpha - alphabetic character test
• isascii(3)
  isascii - test for ASCII character
• isatty(3)
  ttyname - get name of associated terminal (tty) from file descriptor
• isblank(3)
  isblank - space or tab character test
• isc-hmac-fixup(8)
  isc - hmac-fixup - fixes HMAC keys generated by older versions of BIND
• iscntrl(3)
  iscntrl - control character test
• iscontrol(8)
  iscontrol - login/negotiator/control for an iSCSI initiator session
• iscsi_initiator(4)
  iscsi_initiator - kernel driver for the iSCSI protocol
• iscsi.conf(5)
  iscsi.conf - key options to be negotiated in an iSCSI session
• IsCursorKey(3)
  IsCursorKey, IsFunctionKey, IsKeypadKey, IsMiscFunctionKey, IsModifierKey, IsPFKey, IsPrivateKeypadKey - keysym classification macros
• isdialuptty(3)
  getttyent - ttys(5)
• isdigit(3)
  isdigit, isnumber - decimal-digit character test
• isendwin(3)
  initscr, newterm, endwin, isendwin, set_term, delscreen - curses screen initialization and manipulation routines
• isfinite(3)
  fpclassify - classify a floating-point number
• isgraph(3)
  isgraph - printing character test (space character exclusive)
• isgreater(3)
  isgreater - compare two floating-point numbers
• isgreaterequal(3)
  isgreater - compare two floating-point numbers
• ishexnumber(3)
  isxdigit, ishexnumber - hexadecimal-digit character test
• isideogram(3)
  isideogram - ideographic character test
• isinf(3)
  fpclassify - classify a floating-point number
• isless(3)
  isgreater - compare two floating-point numbers
• islessequal(3)
  isgreater - compare two floating-point numbers
• islessgreater(3)
  isgreater - compare two floating-point numbers
• islower(3)
  islower - lower-case character test
• isnan(3)
  fpclassify - classify a floating-point number
• isnettty(3)
  getttyent - ttys(5)
• isnormal(3)
  fpclassify - classify a floating-point number
• isnumber(3)
  isdigit, isnumber - decimal-digit character test
• isp(4)
  isp - Qlogic based SCSI and FibreChannel SCSI Host Adapters
• ispfw(4)
  ispfw - Firmware Module for Qlogic based SCSI and FibreChannel SCSI Host Adapters
• isphonogram(3)
  isphonogram - phonographic character test
• isprint(3)
  isprint - printing character test (space character inclusive)
• ispunct(3)
  ispunct - punctuation character test
• isrune(3)
  isrune - valid character test
• issetugid(2)
  issetugid - is current process tainted by uid or gid changes
• issignal(9)
  signal - kernel signal functions
• isspace(3)
  isspace - white-space character test
• isspecial(3)
  isspecial - special character test
• isunordered(3)
  isgreater - compare two floating-point numbers
• isupper(3)
  isupper - upper-case character test
• iswalnum(3)
  iswalnum - wide character classification utilities
• iswalpha(3)
  iswalnum - wide character classification utilities
• iswascii(3)
  iswalnum - wide character classification utilities
• iswblank(3)
  iswalnum - wide character classification utilities
• iswcntrl(3)
  iswalnum - wide character classification utilities
• iswctype(3)
  iswctype - wide character class functions
• iswdigit(3)
  iswalnum - wide character classification utilities
• iswgraph(3)
  iswalnum - wide character classification utilities
• iswhexnumber(3)
  iswalnum - wide character classification utilities
• iswideogram(3)
  iswalnum - wide character classification utilities
• iswlower(3)
  iswalnum - wide character classification utilities
• iswnumber(3)
  iswalnum - wide character classification utilities
• iswphonogram(3)
  iswalnum - wide character classification utilities
• iswprint(3)
  iswalnum - wide character classification utilities
• iswpunct(3)
  iswalnum - wide character classification utilities
• iswrune(3)
  iswalnum - wide character classification utilities
• iswspace(3)
  iswalnum - wide character classification utilities
• iswspecial(3)
  iswalnum - wide character classification utilities
• iswupper(3)
  iswalnum - wide character classification utilities
• iswxdigit(3)
  iswalnum - wide character classification utilities
• isxdigit(3)
  isxdigit, ishexnumber - hexadecimal-digit character test
• is_cleared(3)
  is_cleared, is_idlok, is_idcok, is_immedok, is_keypad, is_leaveok, is_nodelay, is_timeout, is_scrollok, is_syncok - curses window properties
• is_idcok(3)
  is_cleared, is_idlok, is_idcok, is_immedok, is_keypad, is_leaveok, is_nodelay, is_timeout, is_scrollok, is_syncok - curses window properties
• is_idlok(3)
  is_cleared, is_idlok, is_idcok, is_immedok, is_keypad, is_leaveok, is_nodelay, is_timeout, is_scrollok, is_syncok - curses window properties
• is_immedok(3)
  is_cleared, is_idlok, is_idcok, is_immedok, is_keypad, is_leaveok, is_nodelay, is_timeout, is_scrollok, is_syncok - curses window properties
• is_keypad(3)
  is_cleared, is_idlok, is_idcok, is_immedok, is_keypad, is_leaveok, is_nodelay, is_timeout, is_scrollok, is_syncok - curses window properties
• is_leaveok(3)
  is_cleared, is_idlok, is_idcok, is_immedok, is_keypad, is_leaveok, is_nodelay, is_timeout, is_scrollok, is_syncok - curses window properties
• is_linetouched(3)
  touchwin, touchline, untouchwin, wtouchln, is_linetouched, is_wintouched - curses refresh control routines
• is_nodelay(3)
  is_cleared, is_idlok, is_idcok, is_immedok, is_keypad, is_leaveok, is_nodelay, is_timeout, is_scrollok, is_syncok - curses window properties
• is_notimeout(3)
  is_cleared, is_idlok, is_idcok, is_immedok, is_keypad, is_leaveok, is_nodelay, is_timeout, is_scrollok, is_syncok - curses window properties
• is_scrollok(3)
  is_cleared, is_idlok, is_idcok, is_immedok, is_keypad, is_leaveok, is_nodelay, is_timeout, is_scrollok, is_syncok - curses window properties
• is_syncok(3)
  is_cleared, is_idlok, is_idcok, is_immedok, is_keypad, is_leaveok, is_nodelay, is_timeout, is_scrollok, is_syncok - curses window properties
• is_term_resized(3)
  is_term_resized, resize_term, resizeterm - change the curses terminal size
• is_timeout(3)
  is_cleared, is_idlok, is_idcok, is_immedok, is_keypad, is_leaveok, is_nodelay, is_timeout, is_scrollok, is_syncok - curses window properties
• is_wintouched(3)
  touchwin, touchline, untouchwin, wtouchln, is_linetouched, is_wintouched - curses refresh control routines
• item_count(3)
  menu_items - make and break connections between items and menus
• item_description(3)
  mitem_name - get menu item name and description fields
• item_index(3)
  mitem_current - set and get current_menu_item
• item_init(3)
  menu_hook - set hooks for automatic invocation by applications
• item_name(3)
  mitem_name - get menu item name and description fields
• item_opts(3)
  mitem_opts - set and get menu item options
• item_opts_off(3)
  mitem_opts - set and get menu item options
• item_opts_on(3)
  mitem_opts - set and get menu item options
• item_term(3)
  menu_hook - set hooks for automatic invocation by applications
• item_userptr(3)
  mitem_userptr - associate application data with a menu item
• item_value(3)
  mitem_value - set and get menu item values
• item_visible(3)
  mitem_visible - check visibility of a menu item
• ithread(9)
  ithread_add_handler - kernel interrupt threads
• ithread_add_handler(9)
  ithread_add_handler - kernel interrupt threads
• ithread_create(9)
  ithread_add_handler - kernel interrupt threads
• ithread_destroy(9)
  ithread_add_handler - kernel interrupt threads
• ithread_priority(9)
  ithread_add_handler - kernel interrupt threads
• ithread_remove_handler(9)
  ithread_add_handler - kernel interrupt threads
• ithread_schedule(9)
  ithread_add_handler - kernel interrupt threads
• iwi(4)
  iwi - Intel PRO/Wireless 2200BG/2225BG/2915ABG IEEE 802.11 driver
• iwifw(4)
  iwifw - Firmware Module for Intel PRO/Wireless 2200BG/2225BG/2915ABG driver
• iwn(4)
  iwn - Intel Wireless WiFi Link 4965/1000/5000/5150/5300/6000/6050 IEEE 802.11n driver
• iwnfw(4)
  iwnfw - Firmware Module for Intel Wireless driver
• ixgb(4)
  ixgb - Intel(R) PRO/10GbE Ethernet driver for the FreeBSD operating system
• ixgbe(4)
  ixgbe - Intel(R) 10Gb Ethernet driver for the FreeBSD operating system